Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-05 20:33 UTC

Message

Re: XL-7 newbie question - connecting to keyboard + rack synth

2009-07-26 by sdorange

Massimo,

Thanks for responding!  That does make some sense, but need a little further help:

I've connected MIDI cables as you suggested and can play the EPS to get notes out of the Micro-Q.  However, when I press any of the standard beats from the XL-7 they play thru the Micro-Q using the Micro-Qs sound set.

What I would like to do is: 1) play the Micro-Q through the EPS as a proper synth (already doing that now); 2) Play XL-7 patterns using the XL-7 sound set, and 3) use the XL-7 to sequence patterns & souns from the XL-7 and the Micro-Q.  Can that be done within my current setup?

Much thanks,
--Scott

--- In xl7@yahoogroups.com, massimo <massenmedium@...> wrote:
>
> Yes.
> 
> Best thing to do probably is to connect the OUT from the EPS to the IN on the XL-7. Then connect one of the OUTs from the XL-7 to the IN on the Micro-Q. If you also want to control the EPS with XL-7 you could simply connect the other OUT to the IN on the EPS. Or alternatively the THRU from the Micro-Q to the IN on the EPS.
> 
> You might want to turn the 'LOCAL' keyboard setting on the EPS to OFF if you don't want it to always play from it's keyboard unless you have selected an appropriate channel on the XL-7. That way it can act as a controller and also be controlled from the XL-7. If you select a channel on the XL-7 that the EPS is set to recognise, it will play.
> 
> Hope that makes some sense to ya.
> 
> Massimo
> 
> --- On Sat, 25/7/09, sdorange <scott.orange@...> wrote:
> 
> From: sdorange <scott.orange@...>
> Subject: [xl7] XL-7 newbie question - connecting to keyboard + rack synth
> To: xl7@yahoogroups.com
> Date: Saturday, 25 July, 2009, 6:47 AM
> 
> I'm just getting started with the XL-7 and want to use it to generate beats as well as sequence a Waldorf Micro Q (rack), which is connected to an Ensoniq EPS keyboard.
> 
> Can I control the Micro Q using the Command Station, and still use the keyboard to play the Micro Q?  I'm going around in circles trying to figure this out.
> 
> Many thanks!
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.