Emu XL-7 & MP-7 User's Group

Hey is it possible to send an aux output (sub1 or sub2) in MONO. 
The reason I ask is because if I have a 1/4" plugged into R or L of 
the sub1 output and I send a preset there, then the panning on the 
preset is not MONO i.e. if the cable is in the Left output then 
panning to the right just attenuates the volume of the preset instead 
of properly panning in mono.

     Second question I have is about the Global settings, 
specifically, if I have a pattern where channels 1-4 are sent to send2
(sub1) in the global menu (not preset) then what do I have to do to 
have that configuration saved with the pattern. I thought that this 
involved saving a different multisetup for every pattern, i think it 
even says in the manual that to save global settings you have to save 
the multi, but it **seems** that this is not the case....are 
global sends saved along with the pattern? Also is the multisetup 
used for a particular pattern saved when you save the pattern?

   Thanks in advance

                                         Drew