Hi Justin How about changing presets without leaving multi mode? Does that fix anything? Have you ruled out all stray midi messages by doing an ERASE ALL CONTROLLERS on the track? -m@ > -----Original Message----- > From: Justin Grimley [mailto:grimley@...] > Sent: Saturday, March 06, 2004 2:13 PM > To: xl7@yahoogroups.com > Subject: [xl7] Re: XL-7 midi woes - Aaron?? > > > Aaron, > Do you have any idea what could be going on here? > > I have narrowed the problem down by disconnecting the Virus midi in > from my midi patchbay altogether (midex 8). > I now have the XL-7 midi B connected to the Virus midi in and I am > still seeing the problem. I was convinced this was a Cubase problem. > > Anyway, playing back a pettern on the XL-7 (just one track output to > channel:01B and Dest:both going to Virus) the sound on the Virus will > stop. Preview sound on the Virus will not work (hold Edit and Sync), > playing the pads on the XL-7 will make no sounds on the Virus. > Previously I had to reset the Virus to fix the problem. Changing > presets would have no affect. However, I just discovered that if I > change from multi to single mode and back on the Virus then the > problem is cleared and all is good .... until I start play again on > the XL-7. > > I would greatly appreciate any help on this. > > -Justin. > > > > --- In xl7@yahoogroups.com, erik_magrini@B... wrote: > > Good idea. > > > > rEalm > > > > > > > > > > > > "Justin Grimley" <grimley@i...> > > 02/19/2004 01:04 PM > > Please respond to xl7 > > > > > > To: xl7@yahoogroups.com > > cc: > > Subject: [xl7] Re: Cubase SX / XL-7 midi woes > > > > > > Thanks for trying anyway! > > This evening I'm going to try hooking up a midi merge box to the XL- > 7 > > and split the output so that it goes to both Cubase and the Virus. > > Same with the Midex to Virus connection. That way I can bypass > > Cubase and see if it is a XL-7->Virus issue or a XL7-Cubase->Virus > > issue. > > -Justin. > > > > --- In xl7@yahoogroups.com, erik_magrini@B... wrote: > > > Actually for Sounddiver they both need to be set to sysex. But > it > > looks > > > like you have them set right for what I was thinking, no other > > ideas what > > > could be causing that problem. > > > > > > rEalm > > > > > > > > > > > > > > > > > > rAlm, > > > Where do I check that? > > > In the control menu I can select Midi Control Lo and Hi page. I > > have > > > it set to LoPage -> Contr and HiPage -> SysEx. I believe these > are > > > the settings I need for Emagic SoundDiver. > > > > > > -grimley > > > > > > > > > > I am having some serious problems using the XL-7 as my > pattern sequencer hooked up to Cubase and was hoping someone > might have an idea of what is going on (sorry for the long post). > > First off I will recap my setup as outlined in a previous post: > > In Cubase I have a template with 12 midi tracks which map to > tracks 5- 16 from the XL-7. I am using the input transformer > on the tracks in Cubase so that they filter out channels not > assigned for this track. (I'm using a Steinberg Midex8 midi > interface.) > > For example: > In cubase: > Midi Track 1 -> Halion channel 1 <- From XL-7 channel 5 > Midi Track 2 -> Halion channel 2 <- From XL-7 channel 6 > Midi Track 3 -> Halion channel 3 <- From XL-7 channel 7 > Midi Track 4 -> Halion channel 4 <- From XL-7 channel 8 > Midi Track 5 -> Virusb channel 1 <- From XL-7 channel 9 > Midi Track 6 -> Virusb channel 2 <- From XL-7 channel 10 > Midi Track 7 -> Virusb channel 3 <- From XL-7 channel 11 > Midi Track 8 -> Virusb channel 4 <- From XL-7 channel 12 > Midi Track 9 -> MS2000r channel 1 <- From XL-7 channel 13 > Midi Track 10 -> EX5 channel 1 <- From XL-7 channel 14 > Midi Track 11 -> Juno 106 channel 1 <- From XL-7 channel 15 > Midi Track 12 -> Absynth2 channel 1 <- From XL-7 channel 16 > > Each track in the XL-7 template is storing a CC#11 controller > as the first event so that when I save the template the > channel routings are stored. In the Cubase midi preferences > dialog, I filter out CC##11. I also filter program changes > and SYSEX for both thru and record. > > Every time I use this setup, 2 problems occur at intermittent > times, and with no obvious pattern of events: > > [1] ... The Access Virus b will not make any sound. Even > doing a patch audition by pressing EDIT & SYNC or choosing > any other patch, will not result in sound. The virus has to > be completely shut down and restarted. > > [2] ... The XL-7 will completely lock-up and has to be > restarted. "Local" is on in the XL-7 because I use the pads > to transmit midi to my other devices as well as internal > patches. No tracks in Cubase are being routed back to the > XL-7 so there shouldn't be a midi loopback problem. The only > thing that I can see that the XL-7 receives from Cubase is > midi clock and song pointer info. > > Anything else I should look at? > Thanks for listening, > grimley > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > The information transmitted is intended only for the person(s)or > > entity > > > to which it is addressed and may contain confidential and/or > > legally > > > privileged material. Delivery of this message to any person other > > than > > > the intended recipient(s) is not intended in any way to waive > > privilege > > > or confidentiality. Any review, retransmission, dissemination or > > other > > > use of, or taking of any action in reliance upon, this > information > > by > > > entities other than the intended recipient is prohibited. If you > > > receive this in error, please contact the sender and delete the > > > material from any computer. > > > > > > For Translation: > > > > > > http://www.baxter.com/email_disclaimer > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > The information transmitted is intended only for the person(s)or > entity > > to which it is addressed and may contain confidential and/or > legally > > privileged material. Delivery of this message to any person other > than > > the intended recipient(s) is not intended in any way to waive > privilege > > or confidentiality. Any review, retransmission, dissemination or > other > > use of, or taking of any action in reliance upon, this information > by > > entities other than the intended recipient is prohibited. If you > > receive this in error, please contact the sender and delete the > > material from any computer. > > > > For Translation: > > > > http://www.baxter.com/email_disclaimer > > > > > > [Non-text portions of this message have been removed] > > > > > Yahoo! Groups Links > > > > > >
Message
RE: [xl7] Re: XL-7 midi woes - Aaron??
2004-03-06 by Matt Picone