Re: [wiardgroup] GR-1209B Joystick current
2003-05-14 by Doug Pearson
-------Original Message-------
Show quoted textHide quoted text
From: hypocycloid2 <impossiblesound@hotmail.com>
Sent: 05/13/03 04:47 PM
To: wiardgroup@yahoogroups.com
Subject: [wiardgroup] GR-1209B Joystick current
>
>What's the current requirement for the GR-1209B joystick?
Wouldn't it depend on the input impedance of whatever the output(s) of the joystick is/are plugged into?
But I would strongly suspect that Dave is correct, and that the current consumption is considerably lower than the 15mA-95mA required by most (non-passive) Blacet modules. FWIW I'm using an 800mA supply (required since there are two 95mA Time Machines) to power my 3 fracracks of Blacet/Wiard modules.
-Doug
jasret@mindspring.com