Wiardgroup

Use the 10 volt output from the Sequantizer into the Wave envelope input. Then set the 
rhythmic wave changes by the tempo of the clock into the step input of the Sequantizer.

Use other banks for more dramatic effect.


--- In wiardgroup@yahoogroups.com, Mark Griffiths <mark@...> wrote:
>
> hi all, while I'm waiting for my MXR Pitch Transposer to get off it's high horse and turn back 
on (after turning it's off in a middle of a session), I thought I'd ask about wave sequencing 
with the WC. It says in the Banks that Bank 1 is for wave sequencing. I've set it to low, and 
then sent the output of the WC to Lin on the Classic VCO but I seem to get anything like tonal 
changes I would expect. Maybe I'm going totally in the wrong direction?
> Mark
>