Wiardgroup

I am having a hard time getting the noise ring to process external data. In particular, I have 
been unable to achieve the phased sound when patching another oscillator into the chance 
input jack. When I do this and monitor the main out I hear nothing at all. Has anyone else had 
this problem? What could I be doing wrong?

1. Make sure the "Change" pot is all the way up (LED full on).
2. Input a VCO 10 volt peak to peak triangle or sawtooth wave into "Chance In" jack.
3. Adjust "Chance" control so some LED signal is seen.
4. Monitor main output and play with VCO frequency and "Rate" setting.

--- In wiardgroup@yahoogroups.com, "esoterrafirma" <esoterrafirma@...> wrote:
>
> I am having a hard time getting the noise ring to process external data. In particular, I have 
> been unable to achieve the phased sound when patching another oscillator into the chance 
> input jack. When I do this and monitor the main out I hear nothing at all. Has anyone else 
had 
> this problem? What could I be doing wrong?
>

I'm using a blacet vco. Is that 10v peak to peak?


>From: "Grant Richter" <grichter@asapnet.net>
>Reply-To: wiardgroup@yahoogroups.com
>To: wiardgroup@yahoogroups.com
>Subject: [wiardgroup] Re: noise ring question
>Date: Wed, 16 May 2007 06:48:22 -0000
>
>1. Make sure the "Change" pot is all the way up (LED full on).
>2. Input a VCO 10 volt peak to peak triangle or sawtooth wave into "Chance 
>In" jack.
>3. Adjust "Chance" control so some LED signal is seen.
>4. Monitor main output and play with VCO frequency and "Rate" setting.
>
>--- In wiardgroup@yahoogroups.com, "esoterrafirma" <esoterrafirma@...> 
>wrote:
> >
> > I am having a hard time getting the noise ring to process external data. 
>In particular, I have
> > been unable to achieve the phased sound when patching another oscillator 
>into the chance
> > input jack. When I do this and monitor the main out I hear nothing at 
>all. Has anyone else
>had
> > this problem? What could I be doing wrong?
> >
>
>

_________________________________________________________________
PC Magazine�s 2007 editors� choice for best Web mail�award-winning Windows 
Live Hotmail. 
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_pcmag_0507

Hi Fred

visit:

http://www.blacet.com/VCO.html

the 8th bullet point is the spec you need
(There are ten volts between -5 & +5)

tgif,
-doc


--- In wiardgroup@yahoogroups.com, "fred fain" <esoterrafirma@...> wrote:
>
> I'm using a blacet vco. Is that 10v peak to peak?
> 
> 
> >From: "Grant Richter" <grichter@...>
> >Reply-To: wiardgroup@yahoogroups.com
> >To: wiardgroup@yahoogroups.com
> >Subject: [wiardgroup] Re: noise ring question
> >Date: Wed, 16 May 2007 06:48:22 -0000
> >
> >1. Make sure the "Change" pot is all the way up (LED full on).
> >2. Input a VCO 10 volt peak to peak triangle or sawtooth wave into
"Chance 
> >In" jack.
> >3. Adjust "Chance" control so some LED signal is seen.
> >4. Monitor main output and play with VCO frequency and "Rate" setting.
> >
> >--- In wiardgroup@yahoogroups.com, "esoterrafirma" <esoterrafirma@> 
> >wrote:
> > >
> > > I am having a hard time getting the noise ring to process
external data. 
> >In particular, I have
> > > been unable to achieve the phased sound when patching another
oscillator 
> >into the chance
> > > input jack. When I do this and monitor the main out I hear
nothing at 
> >all. Has anyone else
> >had
> > > this problem? What could I be doing wrong?
> > >
> >
> >
> 
> _________________________________________________________________
> PC Magazine's 2007 editors' choice for best Web mail—award-winning
Windows 
> Live Hotmail. 
>
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_pcmag_0507
>

I'm beggining to think my noise ring is malfunctioning. I have followed the 
pointers to no avail.


>From: "Grant Richter" <grichter@asapnet.net>
>Reply-To: wiardgroup@yahoogroups.com
>To: wiardgroup@yahoogroups.com
>Subject: [wiardgroup] Re: noise ring question
>Date: Wed, 16 May 2007 06:48:22 -0000
>
>1. Make sure the "Change" pot is all the way up (LED full on).
>2. Input a VCO 10 volt peak to peak triangle or sawtooth wave into "Chance 
>In" jack.
>3. Adjust "Chance" control so some LED signal is seen.
>4. Monitor main output and play with VCO frequency and "Rate" setting.
>
>--- In wiardgroup@yahoogroups.com, "esoterrafirma" <esoterrafirma@...> 
>wrote:
> >
> > I am having a hard time getting the noise ring to process external data. 
>In particular, I have
> > been unable to achieve the phased sound when patching another oscillator 
>into the chance
> > input jack. When I do this and monitor the main out I hear nothing at 
>all. Has anyone else
>had
> > this problem? What could I be doing wrong?
> >
>
>

_________________________________________________________________
Like the way Microsoft Office Outlook works? You�ll love Windows Live 
Hotmail. 
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_outlook_0507

perhaps that is the case - i followed these instructions the other day
and got nice phasing/heterodying sounds. blacet vco into wiard noise ring.

--- In wiardgroup@yahoogroups.com, "fred fain" <esoterrafirma@...> wrote:
>
> I'm beggining to think my noise ring is malfunctioning. I have
followed the 
> pointers to no avail.
> 
> 
> >From: "Grant Richter" <grichter@...>
> >Reply-To: wiardgroup@yahoogroups.com
> >To: wiardgroup@yahoogroups.com
> >Subject: [wiardgroup] Re: noise ring question
> >Date: Wed, 16 May 2007 06:48:22 -0000
> >
> >1. Make sure the "Change" pot is all the way up (LED full on).
> >2. Input a VCO 10 volt peak to peak triangle or sawtooth wave into
"Chance 
> >In" jack.
> >3. Adjust "Chance" control so some LED signal is seen.
> >4. Monitor main output and play with VCO frequency and "Rate" setting.
> >
> >--- In wiardgroup@yahoogroups.com, "esoterrafirma" <esoterrafirma@> 
> >wrote:
> > >
> > > I am having a hard time getting the noise ring to process
external data. 
> >In particular, I have
> > > been unable to achieve the phased sound when patching another
oscillator 
> >into the chance
> > > input jack. When I do this and monitor the main out I hear
nothing at 
> >all. Has anyone else
> >had
> > > this problem? What could I be doing wrong?
> > >
> >
> >
> 
> _________________________________________________________________
> Like the way Microsoft Office Outlook works? You'll love Windows Live 
> Hotmail. 
>
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_outlook_0507
>