James,
I laid out the board a few years ago in Adobe Illustrator. I have not
figured out a way to take the layouts I have done this way and make
commercial boards out of them. If there is interest, I will put the
layout in the files section of the group, but I will not be doing any
PCB run. I cannot comment on Grant's communication.
good luck,
Mark
--- In wiardgroup@yahoogroups.com, James Richardson <james@...> wrote:
>
> Hi Mark
>
> As someone without the expertise to lay out a PCB, but very anxious to
> acquire a Wogglebug, I would be delighted to have a copy of your layout.
>
> Any chance of you doing a run of PCBs? I suspect that there would be
> significant interest on the list and I for one would be happy to pay
for
> a PCB.
>
> Over the years I've sent a number of emails to Grant - and never once
> had a reply ..... I enquired about the cost of a Wogglebug a few
> months ago (I know that the 300 series 'Bug is only available to
special
> order and is expensive) but as usual got no reply...
>
> It seems that my only chance of tapping into Wogglebug technology is to
> go the self-build route!
>
>
> Best wishes
>
> James
>
>
> >I've laid out a PCB for the Wogglebug (#3 I believe) if anyone wants
> >it. It's just a PDF file, so you would have to etch your own board. I
> >fit 2 of them on a single Eurocard.
> >
> >Mark
> >
> >
> >
> >
> >
> >
> >
> >
> >--- In wiardgroup@yahoogroups.com, "drj3rk" <dusttemp@> wrote:
> >>
> >> Thanks for pointing out the schematic. A friend and I are going to
> >> build the #4 Standard Woggle Bug now. :D I'll post again when we
> >> decide what to add to it.
> >>
> >>
> >> --- In wiardgroup@yahoogroups.com, davevosh@ wrote:
> >> >
> >> >
> >> > In a message dated 5/31/2006 9:26:22 AM Pacific Standard Time,
> >> > drmabuce@ writes:
> >> >
> >> > The Wbug#3 circuit is also a great 'basic recipe' core design for
> >> > experimentation.
> >> >
> >> > Carpe uhhhhhhhh hmmmmmmmmmmmm....(let's see what would the
word be?)
Show quoted textHide quoted text
> >> > Carpe ......soldering iron... i guess!!
> >> > -doc
> >> >
> >> > PS:
> >> > i know in my heart that Dave Vosh will build one someday
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > mike,
> >> > troublemaker................................... :^)
> >> > yeah, if i could find a way to print the schematic with my
> >brain-dead
> >> > printer / isp set-up..............
> >> > i do so **love** the w`bug that i have !
> >> > best,
> >> > dave
> >> >
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
> --
> James Richardson
>