Wiardgroup

FPE panels are fine as far as i'm concerned, i've got some of both in my system, tho i understand some MOTMers are more particular... in some instances (VCOs and mixers mostly) i prefer having tick marks, which can get expensive vie FPE, but that's less of an issue w/ things like the noise ring.

usually the stoogification is a diy thang, but in your case i thought i needed to buy the panel and send it to you to be assembled... it would eliminate some steps if you got the panels direct--especially if they switch over to stocking panels rather than annual custom orders, which i understand is a possiblity.

b

>Date: Thu, 10 Nov 2005 19:43:22 -0000
>From: "grantrichter2001" <grichter@asapnet.net>
>Subject: Re: Digest Number 644
>
>> i've been waiting a year for the next run of
>stooge panels so i could get a MOTMized noise 
>ring,
>
>Larry Hendry (RIP) was the power behind that. I
>will be surprised if anyone else will do all the 
>work he did for free, and Larry did so for years.
>
>The only reason I even mention the 1/4" format now,
>is because Larry is no longer with us, 
>and I suspect that will be the end of the Stooge
>Panels.
>
>Please correct me if I am wrong. The Stooge panels
>are a perfect match. The FPE panels will 
>be an OK match.
>
>

There is precedent for this, I think. If I remember correctly, we did
a stooge run of noise ring panels, for which Grant offered to do
assembly for anyone who wanted it.

Moe

--- In wiardgroup@yahoogroups.com, "rdrake" <rdrake@d...> wrote:
> usually the stoogification is a diy thang, but in your case i
thought i needed to buy the panel and send it to you to be
assembled... it would eliminate some steps if you got the panels
direct--especially if they switch over to stocking panels rather than
annual custom orders, which i understand is a possiblity.
> 
> b

The Borg 2 PCB has a side connector to allow it to mount to other panels.

I'll need a layout for a MOTM panel to figure out the first one.

So, I would like to order the first MOTM faceplate for a Borg 2 filter.

Let me know at sales@wiard.com and I will sand a check or whatever is needed.


--- In wiardgroup@yahoogroups.com, "mate_stubb" <mate_stubb@y...> wrote:

>
> There is precedent for this, I think. If I remember correctly, we did
> a stooge run of noise ring panels, for which Grant offered to do
> assembly for anyone who wanted it.
> 
> Moe
> 
> --- In wiardgroup@yahoogroups.com, "rdrake" <rdrake@d...> wrote:
> > usually the stoogification is a diy thang, but in your case i
> thought i needed to buy the panel and send it to you to be
> assembled... it would eliminate some steps if you got the panels
> direct--especially if they switch over to stocking panels rather than
> annual custom orders, which i understand is a possiblity.
> > 
> > b
>