Yahoo Groups archive

Wiardgroup

Index last updated: 2026-04-28 23:41 UTC

Thread

Re: Blue 1200 series faceplates

Re: Blue 1200 series faceplates

2005-02-14 by Robair, Gino

Is this conversion deal to 8 jacks available for us black-panel hold-outs? Not sure I want one blue panel in my synth....  :-)
ginorobair
Show quoted textHide quoted text
> ----------
> From: 	grantrichter2001
> Reply To: 	wiardgroup@yahoogroups.com
> Sent: 	Monday, February 14, 2005 7:54 AM
> To: 	wiardgroup@yahoogroups.com
> Subject: 	[wiardgroup] Re: Blue 1200 series faceplates
> 
> 
> 
> > Are the blue faceplates available seperately? I have a couple of 
> > joysticks and a noise ring in black, and I'm thinking I might 
> want to 
> > convert them.
> 
> The way the Joysticks are constructed, there is no simple 
> method to convert an existing one to a blue faceplate, sorry. The 
> gate pushbutton mounts from the front, and the whole assembly 
> is insulated with RTV.
> 
> For a flat $99, I will convert a 6 jack black Noise Ring into an 8 
> jack Blue Noise ring. This adds more features and involves 
> some reworking of the PCB. The warranty is also renewed.
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
> 
>

Re: Blue 1200 series faceplates

2005-02-15 by grantrichter2001

See message 1566 for instructions on adding the two jacks.

--- In wiardgroup@yahoogroups.com, "Robair, Gino" 
<GRobair@p...> wrote:
> Is this conversion deal to 8 jacks available for us black-panel 
hold-outs? Not sure I want one blue panel in my synth....  :-)
> ginorobair
> 
> 
> > ----------
> > From: 	grantrichter2001
> > Reply To: 	wiardgroup@yahoogroups.com
> > Sent: 	Monday, February 14, 2005 7:54 AM
> > To: 	wiardgroup@yahoogroups.com
> > Subject: 	[wiardgroup] Re: Blue 1200 series faceplates
> > 
> > 
> > 
> > > Are the blue faceplates available seperately? I have a 
couple of 
> > > joysticks and a noise ring in black, and I'm thinking I might 
> > want to 
> > > convert them.
> > 
> > The way the Joysticks are constructed, there is no simple 
> > method to convert an existing one to a blue faceplate, sorry. 
The 
> > gate pushbutton mounts from the front, and the whole 
assembly 
> > is insulated with RTV.
> > 
> > For a flat $99, I will convert a 6 jack black Noise Ring into an 
8 
Show quoted textHide quoted text
> > jack Blue Noise ring. This adds more features and involves 
> > some reworking of the PCB. The warranty is also renewed.
> > 
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> > 
> > 
> >

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.