Wiardgroup

I talked to Grant on the phone yesterday as he was unpacking the
Boogie Filter faceplates - the boards are done, so it won't be long....

gc

A bunch of you will be getting your Boogie Filters next week.

Here are some operating notes:

This is an extension of the Lowpass Gate technology using a 
Butterworth circuit instead of a Sallen-Key. But it is still a gate, 
and goes all the way off. You can use it like a combo VCF-VCA. 
The Frequency control range is very wide, from off to 20 kHz. The 
wide range is to accomodate using the 6 dB/Oct output like a 
VCA. It will gate either audio or control voltages.

You can use it like a Mini-Moog type filter, in addition to using it 
like a Lowpass Gate.

With high levels of resonance, the filter will produce distortion at 
the cutoff frequency. This is useful for processing tracks.

The red jumpers on the back control the phase of the 12 and 24 
dB/octave outputs. In the bottom position, the phase is inverted. 
In the top position, the phase is positive. When mixing the 
different outputs, the inverted phase allows the Matrix 12 type 
responses. If you move them to the top position, you can use a 
JAG and 4 VCAs to make a variable slope filter.

Have fun!

Hi Grant,

I realized that I never did get back to you about the banana'ed jags you
built for me.

They work great!

I haven't gotten around to building the linear vca's I'll be needing, I had
just started a new job when the modules arrived, and I'm doing 60-70 hour
weeks till May or June, but when I get freed up, they're at the top of the
list of things to build.

Anyway, I just wanted to (finally) get back to you and thank you, and to
thank you further for pointing me to Homer B. Tilton's 3D Oscilloscope book.

Sorry this has taken so long, I hope all's well with you!

Bob Roesler

sorry folks, I meant to send this to Grant only.

mea culpa

-b

On 02/06/2005 7:23 PM, "Robert Roesler" <bobo@decapod.net> wrote:

> 
> Hi Grant,
> 
> I realized that I never did get back to you about the banana'ed jags you
> built for me.
> 
> They work great!
> 
> I haven't gotten around to building the linear vca's I'll be needing, I had
> just started a new job when the modules arrived, and I'm doing 60-70 hour
> weeks till May or June, but when I get freed up, they're at the top of the
> list of things to build.
> 
> Anyway, I just wanted to (finally) get back to you and thank you, and to
> thank you further for pointing me to Homer B. Tilton's 3D Oscilloscope book.
> 
> Sorry this has taken so long, I hope all's well with you!
> 
> Bob Roesler
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>

Hey no prob,
Tilton's 3D Oscilloscope book is already on order!
Thanks for the tip!
- Justin

--- Robert Roesler <bobo@decapod.net> wrote:

> sorry folks, I meant to send this to Grant only.
> 
> mea culpa
> 
> -b
> 
> 
> On 02/06/2005 7:23 PM, "Robert Roesler"
> <bobo@decapod.net> wrote:
> 
> > 
> > Hi Grant,
> > 
> > I realized that I never did get back to you about
> the banana'ed jags you
> > built for me.
> > 
> > They work great!
> > 
> > I haven't gotten around to building the linear
> vca's I'll be needing, I had
> > just started a new job when the modules arrived,
> and I'm doing 60-70 hour
> > weeks till May or June, but when I get freed up,
> they're at the top of the
> > list of things to build.
> > 
> > Anyway, I just wanted to (finally) get back to you
> and thank you, and to
> > thank you further for pointing me to Homer B.
> Tilton's 3D Oscilloscope book.
> > 
> > Sorry this has taken so long, I hope all's well
> with you!
> > 
> > Bob Roesler
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> > 
> > 
> 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Helps protect you from nasty viruses. 
http://promotions.yahoo.com/new_mail