Wiardgroup

This might be a question for Grant... 

I'm working on this patch using the RND output of the Classic VCO in 
low mode.  I started thinking it would be nice to clock the RND from 
an external source.   I popped open my Classic VCO to see if any of 
the test points provide a RND clock in...  I couldn't find one.  Does 
anybody know if there is an easy mod to clock the RND from an 
external source?

Thanks in advance,

Matthew

What are you going to use as a clock signal?

--- mritenburg <mritenburg@yahoo.com> wrote:

> 
> This might be a question for Grant... 
> 
> I'm working on this patch using the RND output of
> the Classic VCO in 
> low mode.  I started thinking it would be nice to
> clock the RND from 
> an external source.   I popped open my Classic VCO
> to see if any of 
> the test points provide a RND clock in...  I
> couldn't find one.  Does 
> anybody know if there is an easy mod to clock the
> RND from an 
> external source?
> 
> Thanks in advance,
> 
> Matthew
> 
> 
> 
> 



		
__________________________________ 
Do you Yahoo!? 
Take Yahoo! Mail with you! Get it on your mobile phone. 
http://mobile.yahoo.com/maildemo

This was something I was interested in doing, and I got the directions 
from Grant. Once I got a Woggle bug, I felt I didn't really need to. 
The step outputs provide the same functionality.

There isn't a test point. It involved snipping a resistor and/or diode.

On Dec 27, 2004, at 9:43 PM, mritenburg wrote:

>
>
> This might be a question for Grant...
>
> I'm working on this patch using the RND output of the Classic VCO in
> low mode.  I started thinking it would be nice to clock the RND from
> an external source.   I popped open my Classic VCO to see if any of
> the test points provide a RND clock in...  I couldn't find one.  Does
> anybody know if there is an easy mod to clock the RND from an
> external source?
>
> Thanks in advance,
>
> Matthew
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

--- In wiardgroup@yahoogroups.com, Justin Modra <nitrohepcat@y...> 
wrote:
> What are you going to use as a clock signal?
> 

I plan on using the gate from one channel of a Roland MPU-101.  
Infact, last night Christophe (I hope he doesn't mind me sharing 
this) Contacted me and suggested I try doing hard sync.  I tried it 
and it works quite well.  In hindsight, I feel like a boob for not 
thinking of this my self.

--- In wiardgroup@yahoogroups.com, Michael Ford <liquidcolor@e...> 
> from Grant. Once I got a Woggle bug, 

If I only had a wogglebug :-(