Wiardgroup

--- In wiardgroup@y..., "grantrichter2001" <grantrichter2001@y...> 
wrote:

> The VCAs on the oscillators have a gain of 1.25 so if an 8 volt 
> peak to peak signal is run through them, it will be amplified to 10 
> volts peak to peak.

Does this mean that the nearby lag processor needs a 12.5 volt 
voltage to perform attenuation over the VCA's full range; or is the 
VCA's CV input amplified by 1.25 as well?

S. Kuehnl