Wiardgroup

--- In wiardgroup@y..., "grantrichter2001" <grantrichter2001@y...> 
wrote:
> > I'm using MOTM 800 EG's.
> > > 
> > OK, I was not aware that the MOTM ADSRs had a 5 volt 
output. 

OK, Paul Schrieber has been kind enough to inform me that both 
outputs can be converted to +10 volt peak by lifting either side of 
R14.

The signal exists at a +10 volt peak at pin 1 of U3. You could also 
connect a 1K ohm 1/4 watt 5% resistor in series with Pin 1 and 
the tip of a 3.5mm jack and have both +10 and +/- 5 volt 
envelopes available simultaneously.

This would be useful when interfacing to ARP, Wiard and Blacet 
synthesizers.

I would like to thank Paul for being so generous as to provide 
this information.