Wiardgroup

it's basically the same thing as Tom Henry's ADSR from Polyphony.

R.
----- Original Message -----
From: grantrichter2001 <grantrichter2001@yahoo.com>
To: <wiardgroup@yahoogroups.com>
Sent: Thursday, June 27, 2002 11:18 AM
Subject: [wiardgroup] Re: Borg + ADSR


> > I'm using MOTM 800 EG's.
> > >
> > OK, I was not aware that the MOTM ADSRs had a 5 volt output.
>
> Can someone please supply me with a copy of the MOTM 800
> schematic?
>
> It should be very simple to adjust them for simultaneous 5 volt
> and 10 volt outputs. The Vpeak reference for the flip-flop reset
> may be set with a single resistor. Then the 5 volt output can be
> derived by a passive divider. The best of both worlds.
>
> Once again, this is not a slight at Paul, he has excellent reasons
> for doing things the way he does. This would just make it easier
> for those with mixed module systems.
>
> Thank you,
>
> Grant Richter
>
>
>
> To unsubscribe from this group, send an email to:
> wiardgroup-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>