Yahoo Groups archive

Wiardgroup

Index last updated: 2026-04-28 23:41 UTC

Message

Re: [wiardgroup] Re: Frac ear FPD files

2009-10-27 by Paul Lord

Yeah, all that engraving takes a toll on the wallet. I made plain blue Frac ears and then drilled them to accommodate the small Blacet Mixer/Splitter modules, which worked out great. Just line up the module faceplate over the rack ear so that the module mounting hole on the panel matches the innermost mounting holes on the rack ear and drill away.

Paul

On Tue, Oct 27, 2009 at 4:55 AM, Tommy <mrsvomit@tommydog.com> wrote:

I will answer this myself. Yes but it ain't cheap..



--- In wiardgroup@yahoogroups.com, "Tommy" wrote:
>
> I'm going to take a guess that the brief availability of groovy blue rack ears is going to stay a thing of the post.
>
> Since we have these 1200 series frac ear files in FPD format, I'm wondering if one can just send the file to Front Panel Express to be made.
>


Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.