Wiardgroup

The control input expects a +10 volt signal. A +/- 5 volt audio signal will not workl.

--- In wiardgroup@yahoogroups.com, Mark Griffiths <mark@...> wrote:
>
> Dave, thanks for replying,    
>   No, I think I only tried square from the LFO, so if it needs a pulse wave I could do that 
by turning down the frequesncy of the Blacet VCO I guess. Are there any particular magic 
settings on the Borg filter itself?
>    
>   ..and the Key in..is for what?
>    
>   all the best, Mark
> 
> 
> Dave Bradley <mate.stubb@...> wrote:
>           Were you feeding it a pulse waveform?
> 
> Moe
> 
>   On 8/16/06, Mark <mark@...> wrote:   Hi, I've just recieved my Borg and Boogie filters 
(yah!! and thanks
> Grant, truly works of art). I don't seem to have any manuals so a 
> couple of questions.
> 
> 1. How do I get the Borg to act as a low pass gate, I fed it an Blacet
> LFO pulse (into audio..then into CV), took out the EGs and VCA, turned
> the response up and down, no sign of the decay (someone did an 
> excellent demo of this on an MP3). I tried messing carefully with the
> peak control and control change, no dice. What am I doing wrong?
> 
> 2. The two control inputs, one is marked "Control in", the other "Key 
> in"..what is the second one for? Can I use it as a second CV in?
> 
> Looking forward to your answers and hours of fun in the future!
> 
> all the best, Mark
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> Dave Bradley
>