Wiardgroup

> will have to be replaced over the long haul. Also, patching to 
other formats
> is a snap - the Wiard joystick controller has two small patch 
bays that go
> 1/8"-1/4"-RCA-Banana, and if you need more  there's a MOTM 
patch panel that
> has 8 of the same, minus the RCA jacks.
> 

Note that Paul made a small boo-boo in the wiring of the 
multiple modules (at least the ones I have). The banana 
connector is connected only to the switch input of the 1/8" 
connector, so you can not use the banana, 1/8" and 1/4" all at the 
same time. 

To correct this, add a jumper across the back of the 1/8" 
connectors on the panel, that is connect both terminals (tip and 
switch) together with a wire jumper.