Wiardgroup

Wiard Group:

The file "clock in question1.jpg" has been uploaded -
Is this the correct orientation and location of D6 in
the Noise Ring block diagram? 

Question 2 - At low frequencies, why does the Clock
indicator LED flash at changing frequencies? (Flashes
at 1Hz then faster, then slower - without changing the
CLK pot setting.)

- Justin

--- grantrichter2001 <grichter@asapnet.net> wrote:

> 
> There is a silkscreen layout in the manual. If you
> feel comfortable 
> working with surface mount electronics, you can put
> a switch in 
> series with D6. With D6 disconnected, you can use
> the "Clock 
> Out" jack as a "Clock In" for a 0 to 10 volt square
> wave. The 
> pattern advances on the raising edge.
> 
> The "Master Clock" program I wrote for the PSIM was
> intended to 
> provide MIDI and DIN clock out using the Noise Ring
> as the 
> master. But I never figured out how to use the timer
> interupts to 
> measure the tempo of the square wave from the Noise
> Ring.
> 
> --- In wiardgroup@yahoogroups.com, "Andrew
> Scheidler" 
> <xpandrew@p...> wrote:
> > Yeah, I can't use the NR as a master unless I buy
> something 
> that
> > produced MIDI and DIN sync from the NR Clock Out. 
> The mod 
> would *have*
> > to be cheaper than that...
> > 
> > Your idea of having the Ext Rate In be a *divider*
> would be 
> teets on the
> > duck's back!
> > 
> > Andrew
> > 
> > 
> > >>> c.d.sawyer@t... 12/16/04 12:41 PM >>>
> > 
> > 
> > --- In wiardgroup@yahoogroups.com, "Andrew
> Scheidler" 
> > <xpandrew@p...> wrote:
> > > How difficult would it be to add Clock In
> capability?  So that 
> the 
> > internal VCO was not used at all and an external
> clock ran 
> things.  
> > I like to have everything (808, BZone, Fat
> Controller, Mobius, 
> PSIM, 
> > EGs, etc) ticking away in synchronized alien
> machine beats, 
> and it 
> > would be cool to use the Noise Ring as a
> modulator.  Maybe a 
> switch 
> > that disables the VCO and the CLOCK OUT becomes a
> Clock 
> In?
> > 
> > I, too, often use one clock to sync everything in
> the system. One 
> > solution is to use the Noise Ring as the "master"
> clock, but 
> there 
> > obviously are situations in which it is preferable
> to have 
> another 
> > source generate this signal.
> > 
> > IIRC in response to an earlier post on the
> proposed Clock In, 
> Grant 
> > had indicated he would investigate this
> possibility, but I don't 
> > think he ever posted the results... perhaps he
> will weigh in 
> now?
> > 
> > My original thought was to add a switch so that
> the EXT RATE 
> CV IN 
> > becomes a Clock In. But your suggestion has given
> me an 
> even better 
> > idea: could flipping this switch convert the CLOCK
> OUT to a 
> Clock In 
> > *and* also allow the EXT RATE pot and EXT RATE IN
> to control 
> a clock 
> > divider for the pulse signal arriving at the Clock
> In jack?
> > 
> > This would be *very* special.
> > 
> > Chris
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links
> 
> 
> 
> 


		
__________________________________ 
Do you Yahoo!? 
Send a seasonal email greeting and help others. Do good. 
http://celebrity.mail.yahoo.com