Wiardgroup

Manual???? what's that? (oops!)
;'>
as usual....
a much more elegant solution than mine!
;'>
ThanX Professor!

PS(im)
pls forgive the OT...
re: 'click-timing' on the PSIM
did you ever try my pgm: syncable.bas?
it's on Brices Yahoo Group, in files/program code/code
fragments/MBASIC/syncable.bas
it's a 'starter recipe' but the timing clicks can be held to a very
consistent rate if you're careful to keep the interrupt routine lean


--- In wiardgroup@yahoogroups.com, "grantrichter2001" <grichter@a...>
wrote:
> 
> There is a silkscreen layout in the manual. If you feel comfortable 
> working with surface mount electronics, you can put a switch in 
> series with D6. With D6 disconnected, you can use the "Clock 
> Out" jack as a "Clock In" for a 0 to 10 volt square wave. The 
> pattern advances on the raising edge.
> 
> The "Master Clock" program I wrote for the PSIM was intended to 
> provide MIDI and DIN clock out using the Noise Ring as the 
> master. But I never figured out how to use the timer interupts to 
> measure the tempo of the square wave from the Noise Ring.
> 
> --- In wiardgroup@yahoogroups.com, "Andrew Scheidler" 
> <xpandrew@p...> wrote:
> > Yeah, I can't use the NR as a master unless I buy something 
> that
> > produced MIDI and DIN sync from the NR Clock Out.  The mod 
> would *have*
> > to be cheaper than that...
> > 
> > Your idea of having the Ext Rate In be a *divider* would be 
> teets on the
> > duck's back!
> > 
> > Andrew
> > 
> > 
> > >>> c.d.sawyer@t... 12/16/04 12:41 PM >>>
> > 
> > 
> > --- In wiardgroup@yahoogroups.com, "Andrew Scheidler" 
> > <xpandrew@p...> wrote:
> > > How difficult would it be to add Clock In capability?  So that 
> the 
> > internal VCO was not used at all and an external clock ran 
> things.  
> > I like to have everything (808, BZone, Fat Controller, Mobius, 
> PSIM, 
> > EGs, etc) ticking away in synchronized alien machine beats, 
> and it 
> > would be cool to use the Noise Ring as a modulator.  Maybe a 
> switch 
> > that disables the VCO and the CLOCK OUT becomes a Clock 
> In?
> > 
> > I, too, often use one clock to sync everything in the system. One 
> > solution is to use the Noise Ring as the "master" clock, but 
> there 
> > obviously are situations in which it is preferable to have 
> another 
> > source generate this signal.
> > 
> > IIRC in response to an earlier post on the proposed Clock In, 
> Grant 
> > had indicated he would investigate this possibility, but I don't 
> > think he ever posted the results... perhaps he will weigh in 
> now?
> > 
> > My original thought was to add a switch so that the EXT RATE 
> CV IN 
> > becomes a Clock In. But your suggestion has given me an 
> even better 
> > idea: could flipping this switch convert the CLOCK OUT to a 
> Clock In 
> > *and* also allow the EXT RATE pot and EXT RATE IN to control 
> a clock 
> > divider for the pulse signal arriving at the Clock In jack?
> > 
> > This would be *very* special.
> > 
> > Chris
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> >  
> > Yahoo! Groups Links