Wiardgroup

There is a silkscreen layout in the manual. If you feel comfortable 
working with surface mount electronics, you can put a switch in 
series with D6. With D6 disconnected, you can use the "Clock 
Out" jack as a "Clock In" for a 0 to 10 volt square wave. The 
pattern advances on the raising edge.

The "Master Clock" program I wrote for the PSIM was intended to 
provide MIDI and DIN clock out using the Noise Ring as the 
master. But I never figured out how to use the timer interupts to 
measure the tempo of the square wave from the Noise Ring.

--- In wiardgroup@yahoogroups.com, "Andrew Scheidler" 
<xpandrew@p...> wrote:
> Yeah, I can't use the NR as a master unless I buy something 
that
> produced MIDI and DIN sync from the NR Clock Out.  The mod 
would *have*
> to be cheaper than that...
> 
> Your idea of having the Ext Rate In be a *divider* would be 
teets on the
> duck's back!
> 
> Andrew
> 
> 
> >>> c.d.sawyer@t... 12/16/04 12:41 PM >>>
> 
> 
> --- In wiardgroup@yahoogroups.com, "Andrew Scheidler" 
> <xpandrew@p...> wrote:
> > How difficult would it be to add Clock In capability?  So that 
the 
> internal VCO was not used at all and an external clock ran 
things.  
> I like to have everything (808, BZone, Fat Controller, Mobius, 
PSIM, 
> EGs, etc) ticking away in synchronized alien machine beats, 
and it 
> would be cool to use the Noise Ring as a modulator.  Maybe a 
switch 
> that disables the VCO and the CLOCK OUT becomes a Clock 
In?
> 
> I, too, often use one clock to sync everything in the system. One 
> solution is to use the Noise Ring as the "master" clock, but 
there 
> obviously are situations in which it is preferable to have 
another 
> source generate this signal.
> 
> IIRC in response to an earlier post on the proposed Clock In, 
Grant 
> had indicated he would investigate this possibility, but I don't 
> think he ever posted the results... perhaps he will weigh in 
now?
> 
> My original thought was to add a switch so that the EXT RATE 
CV IN 
> becomes a Clock In. But your suggestion has given me an 
even better 
> idea: could flipping this switch convert the CLOCK OUT to a 
Clock In 
> *and* also allow the EXT RATE pot and EXT RATE IN to control 
a clock 
> divider for the pulse signal arriving at the Clock In jack?
> 
> This would be *very* special.
> 
> Chris
> 
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links