Wiardgroup

could someone span a pic of the file? I have a paac, but I'd love to
see what this looks like....


mark


--- In wiardgroup@yahoogroups.com, "grantrichter2001" <grichter@a...>
wrote:
> 
> Also the thickness is set at 1.5mm. There is a piece of 50 mil 
> aluminum underneath the rack ears. The combination fo the two 
> should come out about flush with the 2.5mm module panels.
> 
> I have been told you can fit a multiple or converter on the rack 
> ears. There is almost 1 inch of room, but involves drilling the 
> subpanel. If there is interest, I'll whip up a .fpd file.
> 
> BTW fpd stands for Front Panel Designer, the software you can 
> download for free from Front Panel Express.
> 
> I ordered a pair of the "official" rack ears which continues the 
> lions theme. Will have photgraphs in a few weeks. I am working 
> on finalizing the Boogie Filter PCBs by end of week.
> 
> --- In wiardgroup@yahoogroups.com, "grantrichter2001" 
> <grichter@a...> wrote:
> > 
> > I just uploaded two Front Panel Express files for blue Blacet 
> rack 
> > ears. They were an import test, and very busy graphics wise.
> > 
> > They have a LOT of engraving on them. Just delete the $30 
> worth 
> > of engraving to make blank ones.
> > 
> > But someone may like the artwork too....