Wiardgroup

Also the thickness is set at 1.5mm. There is a piece of 50 mil 
aluminum underneath the rack ears. The combination fo the two 
should come out about flush with the 2.5mm module panels.

I have been told you can fit a multiple or converter on the rack 
ears. There is almost 1 inch of room, but involves drilling the 
subpanel. If there is interest, I'll whip up a .fpd file.

BTW fpd stands for Front Panel Designer, the software you can 
download for free from Front Panel Express.

I ordered a pair of the "official" rack ears which continues the 
lions theme. Will have photgraphs in a few weeks. I am working 
on finalizing the Boogie Filter PCBs by end of week.

--- In wiardgroup@yahoogroups.com, "grantrichter2001" 
<grichter@a...> wrote:
> 
> I just uploaded two Front Panel Express files for blue Blacet 
rack 
> ears. They were an import test, and very busy graphics wise.
> 
> They have a LOT of engraving on them. Just delete the $30 
worth 
> of engraving to make blank ones.
> 
> But someone may like the artwork too....