Wiardgroup

Thanks for the help guys, I'll see what I can put together this week. 
Nice article in EM Gary !!!!!!


Rob



On Friday, September 24, 2004, at 05:41 AM, Gary Chang wrote:

> Ok,
>
> Now that the power is taken care of (presumably), the other issue is
> creating an enclosure for you modules.
>
> The most daunting task - attaching the modules can be achieved
> relatively simply by utilizing the Vector Electronics T-Strut, which
> is an aluminum extrusion that has a slot made for T-Nuts, which are a
> specially made square 4-40 nut that are designed slide in this slot.
>
> The T-Strut is about one inch wide (a slot in both ends).  This allows
> you plenty of material to drill or weld or glue to attach them to a
> suitable cabinet.
>
> It comes in standard rack mount kits, with all the other stuff (sides,
> tops, bottoms, etc., or as raw 60" stock (4 per order).
>
> I learned about these guys while trying to mount 26 NEVE 3104 mic
> pre/eq modules years ago, and have used them in my recent Blue Meanie
> project.
>
> Simply the easist, most elegant solution.
>
> Vector Electronics is in North Hollywood, CA. 
> http://www.vectorelect.com/
>
>
>
<image.tiff>
>
>
<image.tiff>
>
> Yahoo! Groups Links
>
> • 	To visit your group on the web, go to:
> http://groups.yahoo.com/group/wiardgroup/
>  
> • 	To unsubscribe from this group, send an email to:
> wiardgroup-unsubscribe@yahoogroups.com
>  
> • 	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>