Moog Source again.
2013-02-21 by Jim Blair
One more question about the Source. Does anyone here know of a parameter list for the original factory patches? I'd really like to hear what this synth came armed with when new. Thanks, Jim
Thread
Moog Source again.
Re: [vintagesynthrepair] Moog Source again.
2013-02-21 by Paul Krull
The original 15 factory patches were each given their own page in the Source Owner's manual: http://thesnowfields.com/manuals/Source_Manual.pdf pages 60 through 74. Many thanks to the snowfields folks. I'd skip factory patch 15: Snare Drum. Who wants their Source to sound like a snare drum? PT
Show quoted textHide quoted text
From: Jim Blair <ceratos@...> To: vintagesynthrepair@yahoogroups.com Sent: Wednesday, February 20, 2013 5:59 PM Subject: [vintagesynthrepair] Moog Source again. One more question about the Source. Does anyone here know of a parameter list for the original factory patches? I'd really like to hear what this synth came armed with when new. Thanks, Jim
Re: [vintagesynthrepair] Moog Source again.
2013-02-22 by Jim Blair
Thanks Paul. I "reinstalled" them all tonight.
Jim
At 09:59 PM 2/20/2013, you wrote:
Jim
At 09:59 PM 2/20/2013, you wrote:
The original 15 factory patches were each given their own page in the Source Owner's manual:
http://thesnowfields.com/manuals/Source_Manual.pdf
pages 60 through 74. Many thanks to the snowfields folks. I'd skip factory patch 15: Snare Drum. Who wants their Source to sound like a snare drum?
PT
Show quoted textHide quoted text
From: Jim Blair
To: vintagesynthrepair@yahoogroups.com
Sent: Wednesday, February 20, 2013 5:59 PM
Subject: [vintagesynthrepair] Moog Source again.
One more question about the Source.
Does anyone here know of a parameter list for the original factory
patches? I'd really like to hear what this synth came armed with when new.
Thanks,
Jim
Re: Moog Source again.
2013-02-22 by Paul
Hi Gang,
Many thanks for the information on the
Source.
Does anybody have an image of the EPROM a 2732 I
think ?
Cheers
Paul
Clavinet?
2013-03-03 by Jim Blair
I'm wondering if anyone here has attempted to fix a Clavinet pickup? My upper died, and appears to be fixable, IF I can get to the wires inside the epoxy (or whatever they sealed the pickup with.) I would love to simply replace it, but $220 is not in the cards right now. Besides, I hate throwing something out just because it's busted. Especially when I can SEE the broken wire inside the epoxy! Thanks, Jim Blair http://www.facebook.com/ApeIslandSound
Re: Clavinet?
2013-03-03 by Paul
Hi Jim,
A few years ago I had a D6 and had the same
problem, as I recall I used a combinaton of soldering iron and hot air gun
to soften the epoxy near the break, then solder a new joint.
I actually attached an external wire to each
visible join with the plan to have an idividual feed from each section, for
improved filtering, but I did not follow it through and left is stock
instead.
I hope this helps.
Cheers
Paul