RE: [vintagesynthrepair] Battery Acid Damage???
2008-01-05 by Brian Davies
Personally I would never ever use an acid no matter how dilute for this purpose. If the leakage is known to be alkali I would suggest plain water, possibly
Messages
Browse messages
Page 92 of 155 · 7723 messages matched
Re: Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-05 by evilevi72
Thanks guys, I just sent away for my very own power supply through synth parts. Cheers! Levi
Re: [vintagesynthrepair] Battery Acid Damage???
2008-01-05 by Roy J. Tellason
... Yeah, but that assumes that the stuff in question is actually an acid... If the battery in question is a nicad (and I didn t see any mention in the
RE: [vintagesynthrepair] Battery Acid Damage???
2008-01-05 by Brian Davies
Hi Brian A strong solution of bicarbonate of soda is what I ve been using over the past 60 years, brush it on with something like a tooth brush. Then rinse
Battery Acid Damage???
2008-01-05 by rbf45356
I m repairing a Peavey DPM C8 MIDI Master Controller and need to replace the battery. I found that the battery is starting to corode itself and has leaked what
Re: Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-03 by Scott
Re: [vintagesynthrepair] Re: E-mu pk-6 synth with bad data entry control knob
2008-01-03 by Roy J. Tellason
... Sounds like fun, yeah, not every player wants the same old stuff. I have some real issues with Ensoniq, they never wanted to part with any service info
Re: E-mu pk-6 synth with bad data entry control knob
2008-01-03 by gregggibson
... on that ... okay, ... The pk-6 family was their last keyboard synth, and it was phased out between 2005 and 2006 timeframe. They were bought out by
Re: Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-03 by synthparts
I have these adapters for $32 shipped if you are in the US. http://www.synthparts.com
Re: [vintagesynthrepair] E-mu pk-6 synth with bad data entry control knob
2008-01-02 by Roy J. Tellason
... I haven t kept up with this business in a really long time. Like oh, 15 years or so? Something like that, anyhow. I started working on stuff in the
Re: [vintagesynthrepair] E-mu pk-6 synth with bad data entry control knob
2008-01-02 by GB
... They got bought out by Creative Labs a long time ago (I think).
Re: [vintagesynthrepair] E-mu pk-6 synth with bad data entry control knob
2008-01-02 by Roy J. Tellason
... I looked at that page, and would differ from what he says in some respects. He s taking it far enough to not see noise on the scope, which is maybe going
Re: [vintagesynthrepair] E-mu pk-6 synth with bad data entry control knob
2008-01-02 by Roy J. Tellason
... They don t? When did that happen? We used to be a service center for them, until they pulled the plug on that and went to regional one. I know the guy
Re: [vintagesynthrepair] E-mu pk-6 synth with bad data entry control knob
2008-01-02 by Mike de Vries
I m not too sure if you have the same problem that my EMU 6400 Ultra had, but the encoder in mine went a bit like that.. If i spun it left, it would often go
E-mu pk-6 synth with bad data entry control knob
2008-01-02 by gregggibson
I recently bought one of these off of ebay, but the data entry control knob behaves very strangely. When I turn it clockwise one click, it sometimes scrolls
Re: Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-01 by Scott
... After doing a painless search on the web, I found out that the Rogue needs a 24VAC wallmount style adapter with a 3.5mm plug on it. Somewhere in the
Re: Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-01 by Scott
... I take it that it s a separate supply? What are volts / current ratings on the unit? If I know that I can probably point you to where a PS can be had
Rogue power supply on ebay for 50 bucks, WTF!!
2008-01-01 by evilevi72
I m trying to sell my Rogue but without a power supply, it s hard to tell what condition it s in. Surely there must be another way to get a power supply for a
Oberheim 4voice Synthesizer programmer, 4voice mixer modules for sale.
2007-12-18 by Bakis Sirros
hello, sorry for the cross-post and OT: ok, i am in a hurry to sell these quickly, so, low prices: OBERHEIM SYNTHESIZER PROGRAMMER MODULE for 4 voice machine
Re: [vintagesynthrepair] Parts available for many older synths and samplers www.Route66studios.com
2007-12-16 by PeWe
O.k.... So, - I´m interested in a service manual for AKAI S-1100 and shipping to germany. Availability, costs ??? Front panel switches for MKS70 too ... You
Parts available for many older synths and samplers www.Route66studios.com
2007-12-16 by Richard
Hey all we are still supporting all the old synths, samplers and Midi gear so if anyone needs an owners manual, service manual, replacement floppy drives, OS
EML parts
2007-12-14 by Terje Winther
Hi all, Does anyone knows where parts for EML synths can be found? They seem to be pretty sparse, at least here in Europe, and someone asked me to look into
Korg KR 55 trigger problem
2007-12-13 by ianjameshicks
Hi, I just bought a kr 55 and it seems that the trigger out function isnt working correctly, I plugged a cable into the out on the KR and to the arp in on my
Re: SCI Prophet 5 display flicker
2007-12-08 by gil_we
The story with mine is different. I got my Rev 3.2 with no powersupply and bottom/read panel. I DIYed a powersupply for it and had a few issues, among them
Re: SCI Prophet 5 display flicker
2007-12-07 by easterleggs
It has remained perfectly stable since the fix. Are you having a similar problem? Thanks, Stephen
Re: SCI Prophet 5 display flicker
2007-12-06 by gil_we
Hi there. Is your P5 still stable after the fix you describe here ? Thanks! ... nut ... the ... the ... of ... and ... jitter ... flicker ... initial ...
GEM WK4 World Keyboard
2007-11-30 by Brian Davies
Hi All Is there anyone on this reflector with experience of the GEM WK4? I have never worked on this beast but was asked to replace the internal battery,
Re: [vintagesynthrepair] Re: New member
2007-11-28 by Terje Winther
... Thanks! ... It is just out of calibration. There are a lot of input and output filters/envelope followers that need to be calibrated. Lots of trimmers! ...
Prophet 10 Sysex
2007-11-28 by Miguel Mendoza
Hello group, I would like to transmit the factory presets to my Prophet 10. Although I downloaded the files from the net I can t find any information about
Lexicon Prime time II Schems Wanted
2007-11-28 by mrjdevries
Anybody have these???? Any help would be appreciated. This is also known as the Lexicon 95 Prime time II Cheers Mike
Logan String Melody Service Manual/Schematics
2007-11-28 by maschinengeist001
Hi Group I am actively searching the Logan String Melody (I & II) service manuals/schematics. I am willing to buy, clear, readable and complete copies. This is
Sequential Circuits 'Tom' Drum machine
2007-11-28 by mrjdevries
Yay, so i justed added another sequential bit of kit to my list. Only prob is no powersupply. The Tom takes it s power on a 6 pin DIN plug, and is marked as
Muestra Tecnológica Roland - Sala Ruben Dar ío Universidad de Valparaiso, Chile, Miercoles 28-11-2007, 13:00 horas, Entrada Liberada.
2007-11-27 by Rolandclub
Hola amigos Fancymusic, distribuidor de Roland en Chile, Cemu o Centro de Experimentacion Musical, Rolandclub.cl y la Universidad de Valparaiso les invitan a
Re: New member
2007-11-27 by mrjdevries
Welcome! I d be interested how you go with the VP330 carrier bleed through, My friend has a VP-330, and almost over night, it s intelligibility dropped to
New member
2007-11-26 by Terje Winther
Hi everyone, I´m a new member here, discovering all there is to vintage synth repair. I have been building and repairing for a while now, but mostly for my
Re: Poly6 Keyboard Repair.
2007-11-26 by mondokraftwerk
i have fixed this prolbem on my polysix with a stick of Glue Attack and a piece alluminium paper. I don t know if this is the best way to repair the keyboard
Roland Demo Show - Sala Ruben Dario Universidad de Valparaiso, Chile, Miercoles 28-11-2007, 13:00 horas, Entrada Liberada.
2007-11-24 by Rolandclub
Hola amigos Fancymusic, distribuidor de Roland en Chile, Cemu o Centro de Experimentacion Musical, Rolandclub.cl y la Universidad de Valparaiso les invitan a
Re: Poly6 Keyboard Repair.
2007-11-24 by mrjdevries
I did clean the contacts, but it was the actual rubber pads which were no longer conducting.. this kit is supposed to repair the actual rubber contacts etc..
Re: [vintagesynthrepair] Poly6 Keyboard Repair.
2007-11-24 by garret miller
I listen to someone who told me,just a pencil eraser will do.I tried it and it did work.superglue ?,i dont think there is a need for that.They might be
Poly6 Keyboard Repair.
2007-11-24 by mrjdevries
A little while ago, I bought a keypad repair kit supposedly for a poly6 or emulator II (off ebay) as about 6 keys on my P6 were a bit intermittent. I used this
Re: Electro Harmonix vocoder schematic
2007-11-12 by mrjdevries
No schems from me, but I won a EH vocoder too.. very musical.. not many bands, but pretty damn cool, and forgiving. Let me know how you go whith the schems.
Electro Harmonix vocoder schematic
2007-11-12 by fabio
Hello, my vocoder is not working, anyone have the schematic diagram for it? Fabio
Repair roland cr-78
2007-11-11 by mondokraftwerk
Hello Everyone, I m started to repair a roland cr-78. The acid of the back-up battery have damaged some tracks and the audio output is very very low. Somebody
Re: [vintagesynthrepair] Conn 463 organ
2007-11-11 by James Cason
... The supplier of whatever parts, diagrams, etc. for Conn organs is: Organ Service Corp. (Conn, Kimball, Kimball-Elka, Thomas (older), Lowrey (older)) 190
Conn 463 organ
2007-11-11 by Jerry
I realize organ are not this groups main interest but just thought I d try. I m looking for a wiring diagram to use to trace problems with this organ. Thank
for sale BOSS DD-20 Giga Delay Twin Pedal
2007-11-10 by grw20022
this is in mint condition. still in the box and works very good. I am looking to get other instruments with this sale. who ever gets it will have a good
for sale BOSS RC-20 loop station
2007-11-08 by Gerry
this is in mint condition. still in the box and works very good. I am looking to get other instruments with this sale. who ever gets it will have a good
Wanted: Oberheim Xpander / Matrix-12 Encoders `~~`
2007-11-08 by Casio Rapman
I m looking for Oberheim Xpander / Matrix-12 encoders. Please email me privately if you ve got any for sale or have a source for them. Thanks!
Re: [vintagesynthrepair] Re: Prophet 5: -15v voltage rail is shorting...
2007-11-06 by scott frye
Excellent!!..Bad cap BAD! gil_we wrote: Thanks you. BTW, I managed to solve the problem simply by replacing
Re: Prophet 5: -15v voltage rail is shorting...
2007-11-06 by gil_we
Thanks you. BTW, I managed to solve the problem simply by replacing the tantalum with a 10uf/50v regular cap.