KORG CX3 Organ Key Click
2002-02-03 by robroth1
Hi, I know it s not a synth but...This is the older model. It works well and sounds good but the key click is missing.The knob and pot are in good shape with
Messages
Browse messages
Page 148 of 155 · 7721 messages matched
Re: Kurzweil 1000px etc
2002-02-01 by savagery242
Woah... You serious? I didn t mention it, because I didn t think it important, but I checked the battery (lithium) and SOMEHOW it is still 100% alive... but
Re: I'm not sure this is 'Vintage', but...
2002-02-01 by Jim Birch
Hey Dave, The best place to go in Chicago is Midwest Music Menders. They are in a little plaza at the corner of Fullerton and Elston (just east of Damen).
Refresher course needed
2002-02-01 by Robert Williams
Hey techs, I went through the US Air Force electronics school about 17 years ago, and thought I was doing pretty well, but recently I was going through some
Re: Kurzweil 1000px etc
2002-01-31 by Peter Blackett
HI, I think 1989 is now vintage ! if any equipment hasn t been used for several years then it is possible that the battery used to store the preset settings
Re: [vintagesynthrepair] I'm not sure this is 'Vintage', but...
2002-01-31 by mishon66@aol.com
In a message dated 1/30/02 3:05:44 PM Pacific Standard Time, savagery242@yahoo.com writes:
I'm not sure this is 'Vintage', but...
2002-01-30 by savagery242
Hi- I just got a hand me down Kurzweil 1000 PX (1989?) from my older brother. He owns a recording studio and thus takes very good care of his gear, but this
Re: [vintagesynthrepair] Key Pressure on Omni 6000
2002-01-30 by guitarampsky@juno.com
Jeff, Morlock s Organ Parts has aquired the parts and service manuals for these. You can find their phone number at the MITA web site or drop me a note at work
Key Pressure on Omni 6000
2002-01-29 by rv_jeff
Hi, I bought a Wurlitzer Omni 6000 organ at auction this past weekend. Everything seems to work fine but three keys, one on the upper keyboard and two on the
the Silicon Zoo
2002-01-26 by Brian Andrew Marek
Okay, fellow geeks, hope this site isn t old news to you - I ran across it accidentally while trying to find the data sheet for an IC. Anyway, it s a
Re: Roland SH1000 Service manual
2002-01-26 by wotzitwotzit
Hello! Thanks for the input guys! The on-line PDF would be perfect. Please let me know if you can do this. I m in western Canada, apparently roland Canada is
Re: AlphaSyntauri & SoundChaser software
2002-01-24 by Peter Blackett
Dear Dharma Bummer ,and list its not quite as straight forward as it should be . after some investigation it seems that the software is copy protected . the
Hi
2002-01-23 by nutty80s
Hi, I just joined this list. Although I recognize some names from the Combo-Organ group as well. My name is Mike Walters, and I m into vintage synthesizers,
AlphaSyntauri & SoundChaser
2002-01-23 by Dharma Bummer
Not really a repair issue, but I have a line on some old Apple II-related music hardware, specifically the AlphaSyntauri & Passport SoundChaser stuff, but I
Sequential Circuits Six-Trak
2002-01-21 by Dharma Bummer
Anybody know much about the Six-Trak? I have one I ve been trying to repair off and on. I ve been able to fix most of the obvious stuff, but one particular -
Re: [oldsynth] Multimoog Problems
2002-01-19 by uwe_vogel
I had the same problem on my Micomoog and found that somebody had already put a resistor in front of the trimpot. Still the range wasn´t big enough. I put a
RE: [vintagesynthrepair] Roland SH1000 Service manual
2002-01-17 by Bjorn Karlsson
Hi! I got mine for FREE from Roland Sweden. It s only photocopies, but they are OK. If you can wait some week I ll put it online in PDF format. Best Regards
Re: Roland SH1000 Service manual
2002-01-16 by arnaldocortega
Write to Ranger (ranger@candisc.com) or go to their home page (http://www.candisc.com/ranger) for fone numbers. I bought mine for CAN$20,00. Regards, Arnaldo.
Re: Roland SH1000 Service manual
2002-01-16 by arnaldocortega
Write to Ranger (ranger@candisc.com) or go to their home page (http://www.candisc.com/ranger) for fone numbers. I bought mine for CAN$20,00. Regards, Arnaldo.
Re: Roland SH1000 Service manual
2002-01-16 by arnaldocortega
Write to Ranger, at Canada (ranger@candisc.com) or go to their home page for fone numbers (http://www.candisc.com/ranger). I bought mine for CAN$20,00 a couple
Roland SH1000 Service manual
2002-01-16 by wotzitwotzit
Hello! Would anyone know where I could aquire a service manual for my Roland SH-1000? Roland wasn t much help... My poor old monosynth is on the fritz, it
Re: [vintagesynthrepair] Trigger Happy?
2002-01-15 by Robert Williams
Hmm....not sure how to get a trigger off of a cymbal. About 25 years ago we used to make our own synth drums by glueing a small speaker (transistor radio
Trigger Happy?
2002-01-15 by steven burnett
howdy, there is probably a simple way to do this, but alas, i cannot think of it.. my goal is to have a trigger set up to the actual hi-hat cymbals on a drum
Re: [vintagesynthrepair] Jupiter 6 control panel
2002-01-15 by mishon66@aol.com
In a message dated 1/15/02 12:26:32 PM Pacific Standard Time, fin@worton.com writes:
Jupiter 6 control panel
2002-01-15 by Fin
Has anybody got experience or information about the Jupiter 6? The control panel section for the oscillators has developed a fault. The LED s and buttons all
Re:Re: [vintagesynthrepair] Whiter Keys??? (fwd)
2002-01-15 by Arnaldo Cavioli Ortega
Richard: I d take care with such products. Most stain cleaners are acid and can damage the plastic. You should try the product on a hidden area of a single key
Re: [vintagesynthrepair] Whiter Keys???
2002-01-15 by Rob Vezina
If you re going to take the keys off, I d recommend soaking them in water with a few scoops of a product called OxiClean I ve never tried it on keys, but it
Whiter Keys???
2002-01-15 by phaeton777
Hi, Does anyone know how to bleach stains out of plastic synth keys? I ve got a Kurzweil PC88 that looks like it s seen a lot of sun or maybe it s nicotine-I
Re: [vintagesynthrepair] ARP AXXE OUT OF TUNE
2002-01-13 by mishon66@aol.com
In a message dated 1/13/02 5:23:39 AM Pacific Standard Time, keyboard@lisco.com writes:
Re: ARP AXXE OUT OF TUNE
2002-01-13 by will7370
My only recommendation would be to get on the OdysseyPatch email list and submit your question there. The two machines are so similar that maybe someone over
ARP AXXE OUT OF TUNE
2002-01-13 by keyboard624
My old AXXE[orange & black with pressure pads] is out of tune when I turn it on.[Very flat] It improves after it is on for a time. Then I can usually bring it
Poly-800II Delay Problem
2002-01-12 by MaTeJ Krajnc
Hi, I bought second hand Poly-800II and I noticed that Delay isn t functioning as it should. And since there isn t any Korg service available in my country I
MG-1 lfo rate mod - Success! :)
2002-01-10 by aurastar77
Hola DIYers! :) My first real mod (ie, one I didn t have step by step instructions for) is complete, and works like a charm. I ve set it up with a switch so
Re: Concertmate MG-1 mods/schematics
2002-01-08 by aurastar77
Hey Peter... yes, yes, by all means, send them over! :) Just mail them to my address above. Thanks a million... Duane ... where ... --
Re: Concertmate MG-1 mods/schematics
2002-01-08 by ullrich_67
Hallo! ... I have scanned schematics (1.3MB). If you want I can send it per private email. Ciao Peter |/ (o o)
Concertmate MG-1 mods/schematics
2002-01-07 by aurastar77
Hello from the new guy :) I ve got an MG-1 that I found at a pawn shop and resurrected. Man, do I wish I had found this group about 6 months ago! :) Anyway,
Re: [vintagesynthrepair] Digest Number 149
2002-01-07 by ed hallborg
Thank you. Ed ... __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/
re: rhodes techs
2002-01-06 by Jim Birch
try http://www.fenderrhodes.org for techs. they have a huge list. Good Luck, Jim Date: Sat, 5 Jan 2002 14:55:03 -0800 (PST) From: ed hallborg
Re: [vintagesynthrepair] Digest Number 147
2002-01-05 by ed hallborg
Hi, I m Looking for a Rhodes Tech too, someone in the Buffalo, Pittsburg, or hell anyone in NY State. Also looking for a suitcase amp for a 73 Rhodes in the
Re: [vintagesynthrepair] Digest Number 146
2002-01-04 by steven burnett
studio, eh? awesome! i ve just had my memory moog repaired by Analogics. i didn t know of any local people. do you? i think i may have a problem with my Korg
Re: [vintagesynthrepair] houston area?
2002-01-04 by mishon66@aol.com
In a message dated 1/3/02 7:02:47 PM Pacific Standard Time, dzogchen2002@yahoo.com writes:
Re: [vintagesynthrepair] houston area?
2002-01-04 by Barry Michael
Richard, Hi - I lived in Austin from 72 till 82 - the time of the Third Coast Bands - worked at Crosswinds Sound and Rough Cedar Studios - great music in
Re: [vintagesynthrepair] houston area?
2002-01-04 by mishon66@aol.com
In a message dated 1/3/02 6:28:39 PM Pacific Standard Time, dzogchen2002@yahoo.com writes:
Re: [vintagesynthrepair] houston area?
2002-01-04 by Barry Michael
I am. Barry Michael Tri-Kaya Productions (Studio Owner/Engineer)) ... __________________________________________________ Do You Yahoo!? Send your FREE holiday
Vintage keyboard schematics source
2002-01-04 by Robert Williams
Found this web page for ordering vintage keyboard schematics. Thought maybe someone would be interested: http://www.helpfulmusic.com/circuits.html Rob
UK repair shop for vintage synths
2002-01-04 by will7370
Found this web page for a repair shop in the UK that specializes in vintage synths. Thought maybe someone would be interested: http://www.synthrestore.co.uk/
Re: [vintagesynthrepair] Re: concertmate MG-1
2002-01-04 by devin walsh
yeah i was thinking it would be cool to put some nice wood sides for it.. looks like there is plenty of room for the 1/4 jacks.. its outs are mounted on their
concertmate MG-1 info /2
2002-01-03 by Peter Blackett
hi, I think it may have been Paul Shreiber who was involved with the MG-1 design. he has a web site at http://www.synthtech.com handy also for CEM ic
Re: [vintagesynthrepair] Re: concertmate MG-1
2002-01-03 by Robert Williams
I found a web page dedicated to the MG-1. Seems to be pretty thorough. You ll find it here: http://www.kleonard.com/gear/mg1.htm
Re: [vintagesynthrepair] Re: concertmate MG-1
2002-01-03 by Robert Williams
If that MG-1 is missing its side panels, this might be a good time to replace them with some nice walnut or maple sides, stained and varnished. I ve seen a