Vintage Synth Repair

Thanks Dude,

Just what I needed! Outstanding.

Now all I have to do is find the mating 8pin cinch-jones connector 
and I'm in the gravy! I have the six pin, in various forms, but the 
8pin's are harder to find for some reason.

Thanks,

John



--- In vintagesynthrepair@yahoogroups.com, "gerryrdahl" 
<gerryrdahl@y...> wrote:
> 
> Hi John,
> Here is the Cable info....
> 
> 8 pin connector..
> 
> Pin 1 +12v/+15v
> 
> Pin 2 Ground
> 
> Pin 3 -12v/-15v
> 
> Pin 4 S-Trig
> 
> Pin 5 Ground
> 
> Pin 6 V Trig
> 
> Pin 7 Aux voltage out (Slider on 1150)
> 
> Pin 8 Pitch voltage out (ribbon on 1150)
> 
> 
> 8 pin to 6 pin conversion is pin for pin
> however the 6 pin connector does not use pins 4 or 5.
> 
> 8p = 8 pin connector
> 6P = 6 pin connector
> 
> 8p-pin 1 = 6P-pin 1
> 8p-pin 2 = 6P-pin 2
> 8p-pin 3 = 6P-pin 3
> 8p-pin 6 = 6P-pin 6
> 
> 6P-pin 4 = NC
> 6P-pin 5 = NC
> 
> Hope this helps, and Enjoy the 1150,  It Is AWESOME!!!!!
> 
> 
> GD
> 
> 
> 
> 
> --- In vintagesynthrepair@yahoogroups.com, "John LeVasseur" 
> <jrlaudio@o...> wrote:
> > Hi all,
> > 
> > Hoping someone can help me out on this. I need the pin-out 
diagram 
> > of the Moog 1150 Ribbon Controller on the 8pin Cinch-Jones 
> > connector. If anyone also has the diagram for the cable that 
> > converts this 8pin to a 6pin and two phone jacks (CV/Trig).
> > 
> > Thanks again,
> > 
> > John LeVasseur