Prophet 2000 Fuse
2007-01-30 by MadjacK
Hey. I as curious to know if anyone else has had a similar problem with their prophet 2000. The fuse has recently blown when I went to power on the unit. I had
Messages
Browse messages
Page 15 of 23 · 1146 messages matched
Re: [prophet2000] Re: Midi cc for Prophet 2000
2007-01-20 by StudioGroups
... to route say the filter frequency to the aftertouch or modwheel? Or map the FF to any other controller(breath, footpedal) for that matter? If so how
Re: [prophet2000] Re: Midi cc for Prophet 2000
2007-01-20 by StudioGroups
... route say the filter frequency to the aftertouch or modwheel? Or map the FF to any other controller(breath, footpedal) for that matter? If so how would
Re: [prophet2000] Digest Number 209
2007-01-17 by Jeffrey Needham
it is, after all, almost equivalent to a prophet five in it s main ... The 200x uses the CEM 3379, which sounds close to the 3372 sonically (found in the T8
Re: Midi cc for Prophet 2000
2007-01-17 by bcomnes
Brian the whole manual is in the Files section - I ve read it several times, you should too !! CC controllers are way limited on this sampler..that is
Re: Midi cc for Prophet 2000
2007-01-17 by skylab001
I know this is an old thread but I was curious if it is possible to route say the filter frequency to the aftertouch or modwheel? Or map the FF to any other
Re: [prophet2000] Re: 'cinged' chip and broken disk drive
2006-12-04 by j. aaron
hi duncan thanks for responding i found a couple lists of acceptable drives for the 2002 so im now searching around to find one (hopefully cheap!) as for the
Re: 'cinged' chip and broken disk drive
2006-11-24 by ferrograph632
... patch rewiring?
Re: [prophet2000] 'cinged' chip and broken disk drive
2006-11-23 by j. aaron
this is the page i found (at the bottom) listing acceptable replacement drives: http://www.analoghell.com/studio/p2k/index.cfm?page=techspec hope that helps -t
Re: [prophet2000] 'cinged' chip and broken disk drive
2006-11-23 by Dazzer
What drives are good replacements? And does it require some fearful patch rewiring? Dazzer ... From: j. aaron To: prophet2000@yahoogroups.com Sent: Thursday,
[prophet2000]
2006-11-23 by Jesper Ulrich Jørgensen
Got 1 for sale. Great condition – diskdrive works. Some spareparts from wine country. Ship WW. Got 1 for sale. Great condition diskdrive works. Some
RE: [prophet2000] 'cinged' chip and broken disk drive
2006-11-23 by j. aaron
hi michael thanks for your help i scoured around on the internet after i posted my problems and found a list of other acceptable drives so i hope to be able to
RE: [prophet2000] 'cinged' chip and broken disk drive
2006-11-22 by Michael Ella
Tom- I needed a replacement drive too last year for my prophet. I found the TEAC FD-235HF worked well- the trick is to find a drive that has moveable jumper
'cinged' chip and broken disk drive
2006-11-21 by tomkah
howdy do i have both a 2000 and 2002 the 2k developed some type of high resonance on playback and i was told it needs some type of chip replacement. just
Re: P2000-users from germany here?
2006-11-07 by mdzron
Hi there, I got a P2002, living in berlin - does that count? ;) ron.
Re: P2000-users from germany here?
2006-11-06 by Jair-Rohm Wells
Well...i grew up in Germany, own a P2002 live in Sweden and perform in Germany a lot. Any help? JPW ________________________________________________ Yo! Check
P2000-users from germany here?
2006-11-06 by beabeat2003
Hi together, looking for german P2000-users, anyone here? THX
Re: Re: [prophet2000] P2K floppy disc backup on pc
2006-09-28 by ac
Yeh, they ve been saying that for years. At least you can do SDS dumps to/from the Prophet using Translator.
SV: Re: [prophet2000] P2K floppy disc backup on pc
2006-09-28 by Brian Ronn
Hi I know that Translator from www.chickensys.com reads a number of different file formats and I m sure that they could do the job. Unfortunately they refuse
Re: [prophet2000] P2K floppy disc backup on pc
2006-09-28 by ac
I d imagine so. Anybody know how to write the software?
Re: [prophet2000] P2K floppy disc backup on pc
2006-09-28 by Dazzer
Can t you get a floppy drive that will read the P2K discs and hook that to a PC and use software to interpret the different format? D ... From: ac To:
Re: [prophet2000] P2K floppy disc backup on pc
2006-09-28 by ac
AFAIK it s been long reported that there is no way of reading Prophet discs from PC or Mac s. Apparently the physical formating of the disks is different. So
P2K floppy disc backup on pc
2006-09-28 by brian_ronn
Hi Wizards! I m looking for a way to backup/store my P2K floppy disc on my pc harddrive. I don t think that making backup copies on a second set of floppies
Re: Sound Designer for P2000
2006-09-14 by wintersunproject
... I got help i the end on this from Toby & Brian, many thanks guys. Just to help anyone on this, if your having trouble getting the sound designer software
Sound Designer for P2000
2006-09-13 by wintersunproject
Hi it s my first post on here, i wanted to run Sound designer on my mac for my P2000 but the file i downloaded which was a 86k sit file does not work, it will
can anybody help me with sample mapping
2006-08-25 by skylab001
I am trying to load up a few drum sounds and need them mapped, only about 5 sounds and I ve read the manual and have been trying this for weeks. I get to the
Re: Midi Cc for Prophet 2000
2006-08-15 by Craig Walker
Thanks all for you help with this. It is a great sounding sampler, so this idea was more of an ergonomic thing really. Like one of the user pointed out though,
Re: Midi cc for Prophet 2000
2006-08-14 by ferrograph632
... don t forget aftertouch .... I think you can map channel pressure to a couple of things... it s been a while, but I suspect it s mapped to the same
RE: [prophet2000] Re: Midi cc for Prophet 2000
2006-08-11 by Michael Ella
Brian- I think you re right. Volume- pitchbend and mod might be its limits. For a 20 yr old sampler it still is great sounding. I ve had great success using
Re: Midi cc for Prophet 2000
2006-08-11 by bcomnes
My recollection is that the P2000 does not support CCs except a few basics like vol, mod, pitchbend , see section 8 of the manual for MIDI ....you can download
Midi cc for Prophet 2000
2006-08-10 by boxcorsair
Hi all My first post but I think it is a bit of a tricky issue. I am trying to setup up a Doepfer Pocketdial to control the filter, envelope and LFO. The
Re: [prophet2000] P2K blows the fuses
2006-07-15 by Russell Rose
try a slow acting, same value fuse.
[prophet2000] P2K For sale.
2006-07-15 by Jesper Ulrich Jørgensen
Good condition only cosmetic flaws. Denmark. Ships to anywhere.
P2K blows the fuses
2006-07-15 by brian_ronn
Hi Wizards My P2K keeps blowing the fuses. When I install a new 240V and 0,25A fuse (Europe specifications according to the manual)I can turn the P2K on and
Re: P2000 Sound Designer Help needed
2006-06-07 by skylab001
I have finally spent some more time with this. I picked up an old classic mac, and have been trying to get it working with the p2000 sound designer and my
Re: [prophet2000] how much memory do i have?
2006-04-26 by Russell Rose
there is a way to determine RAM size via a series of keystrokes from the front panel. the procedure is outlined in owner s manual somewhere at the back of the
how much memory do i have?
2006-04-26 by boothnavy
I just got a P2002/#0783 and i am wondering how i tell how much RAM is in there. I see what looks like a RAM type expansion card. it is plugged into a port
Arpeggiator Clock P2000
2006-04-20 by MadjacK
Hello fellow Sequential users. I have an older prophet 2000 (0276) and am having trouble getting it to recieve midi clock messages to run the arpeggiator. I
Re: Anyone Mod'ed or Hacked a P2k keyboard ?
2006-04-13 by ferrograph632
... main thing being, all the P2K controls will be housed in a compact desktop case. I forgot the differences between the 2002 & the 2000, but whatever those
Re: P2000 Sound Designer Help needed
2006-04-08 by skylab001
Is there anything particular you did to get it to work? What kind of interface are you using, USB or serial? DSP Quatrro actually works for prophet to mac
Re: [prophet2000] P2000 Sound Designer Help needed
2006-04-08 by sven erga
... S.D.originally did indeed only work with 68k macs , and as I remember with the copy i once had, with system6! I think S.D. started out as a sample editor
Re: [prophet2000] P2000 Sound Designer Help needed
2006-04-08 by Toby Frisk
It work on my G4 in Classic mode under OS X /Toby http://www.analogprophet.com http://www.soundofmusic.se From: ac Reply-To:
Re: [prophet2000] P2000 Sound Designer Help needed
2006-04-07 by ac
I think Sound Designer for the Prophet 2000/2 will only work on older 68k Mac processors not the newer G3/G4 etc.
P2000 Sound Designer Help needed
2006-04-07 by skylab001
Hello everybody- I have downloaded the p2000 Sound Designer and it looks like a great program for using with the P2002 if only I could figure out how to get it
Re: [prophet2000] Looking to buy a Prophet 2002
2006-03-24 by Toby Frisk
I have one for sale. Contact me at info@analogprophet.com /Toby From: skylab001 Reply-To: Date: Thu, 23
Re: [prophet2000] Looking to buy a Prophet 2002
2006-03-23 by Russell Rose
More than ready to sell mine, has brand new disk drive, works perfectly, with original owner s manual. $150. Regards, Russ
Looking to buy a Prophet 2002
2006-03-23 by skylab001
If anybody is looking to sell theirs or knows where one can be found please let me know, Thanks Brian
creating presets
2006-01-03 by jarrre909
Hi all- Anyone with more experience with a prophet than I do care to share any quick and useful way to build presets. The manual for this thing is poorly
Re: [prophet2000] LOOKING for A Prophet 2002 Knob
2005-12-15 by ac
http://www.winecountrysequential.com/page9.html $9 ac
Arp sync
2005-12-15 by pro2andrius
Hi friends How can i synchronize the ARP to incoming Midi clock. The manual says pressing Execute when Rate selected, but it doesn t work! Thanks to everyone