Sequential circuits samplers

TIGHTEN THE POTS  AND MAKE SURE GROUND IS CONNECTED..
DON'T PUSH BUTTONS SO HARD AND LOOK FOR LOOSE CIRUIT BOARD

GENERAL PROBLEM...PREVENT IT FROM GETTING ANY WORSE.

CHARLES.
----- Original Message ----- 
From: "bcomnes" <bcomnes@...>
To: <prophet2000@yahoogroups.com>
Sent: Tuesday, September 02, 2008 9:03 AM
Subject: [prophet2000] flaky 2002


> So i boot up my 2002 and it works perfect but around the 90 minute 
> mark or so the light on Save button starts flashing on and off and the 
> display keeps changing...this is all happening with no MIDI signal 
> being transmitted...however I can play the sample in memory fine but 
> my ability to edit from the switches and dials  is gone because the 
> display and buttons keep chnaging and won't hold my selection...does 
> anyone have any ideas? 
> 
> I'm gussing a chip is warming up and going south ....but has anyone 
> else had this occur and got it fixed??
> 
> thanks in advance 
> 
> Brian 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>