2010-04-01 by Chromatest J. Pantsmaker
Try using an old toothbrush with the deoxit to get those troubled areas.
On Thu, Apr 1, 2010 at 5:43 AM, backshall1 (dsl)
<backshall1@bellsouth.net> wrote:
> Success! The new TC5514 is installed and I have 32 working presets. The
> other main problem on this Polysix is related to at least a couple of other
> threads I've seen people discussing. It used to have major problems with
> distortion on voices 5 and 6. After hosing it down with deoxit a couple of
> times and doing a lot of detailed cleaning, it is now to the point where the
> distortion is just about gone, but these two voices still take a lot longer
> than the others to warm up and get in tune. For voice 5, that could be 30
> minutes. I don't know why there is so much crud on the 366 board in the area
> of IC 35-38, or what it is or why it's so hard to get off, but I intend to
> just keep cleaning since it makes a noticable difference every time I get an
> area cleaned.
> Don B.
>
> _____
>
> From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
> backshall1 (dsl)
> Sent: Thursday, March 25, 2010 8:28 AM
> To: PolySix@yahoogroups.com
> Subject: RE: [PolySix] P6- all programs don't save EG and VCF levels (not
> properly)
>
>
>
>
> I ordered half a dozen TC5514 APL-3 chips from Quest. I hope this chip fixes
> it. I couldn't think of any other explanation.
> Don B.
>
> _____
>
> From: backshall1 (dsl) [mailto:backshall1@bellsout
> <mailto:backshall1%40bellsouth.net> h.net]
> Sent: Thursday, March 18, 2010 7:43 AM
> To: 'PolySix@yahoogroup <mailto:%27PolySix%40yahoogroups.com> s.com'
> Subject: RE: [PolySix] P6- all programs don't save EG and VCF levels (not
> properly)
>
> There is only one memory chip, the TC5514.
> Don B.
>
> _____
>
> From: pietro [mailto:pietrobeatrice@ <mailto:pietrobeatrice%40hotmail.com>
> hotmail.com]
> Sent: Wednesday, March 17, 2010 5:43 PM
> To: backshall1@bellsout <mailto:backshall1%40bellsouth.net> h.net
> Subject: RE: [PolySix] P6- all programs don't save EG and VCF levels (not
> properly)
>
> Hallo Don B!!!
>
> what we gona do? I guess if the memory for vcf and eg are different chip
> from the other....
>
> ...maybe I have to study more the circuit...
>
> waiting for good news from you...
>
> regards
>
> petrolio
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo! Groups Links
>
>
>
>
--
.sig
-Chromatest J. Pantsmaker
http://www.chromatest.net
