Discussion about the Korg PolySix synthesizer

Start be replacing the part that phisically seems as they were 
affected by the corrosion and retrace all bad (black) traces... does 
sound like a programmer problem


--- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> 
wrote:
> The sympthoms - the synth sound strange and I can't Switch the bank 
led's correctly. When I switch the synth on  bank 1,2,4,7 are on. + 
to tape, from tape and error cancel. / tommy
> gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it 
is needed to retace the corroded
> traces and replace parts that are places over or near them.
> 
> See the procedure description here:
> 
> http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html
> 
> 
> 
> 
> --- In PolySix@yahoogroups.com, "groovedoctor23" 
<groovedoctor23@y...> 
> wrote:
> > I have problem with my korg polsix- the  battery problem. I have 
> tried 
> > to clean the klm367 board and replaced the ic30 and ic31 and also 
> > changed the battery/ not working after this . I'm not so good on 
> > electronic so I can't do anymore than this. I wonder if anyone 
can do 
> > the repair or have a fully working klm367 board to sell. 
> > 
> > 
> > Tommy sweden
> 
> 
> 
> 
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 
> 
> 
> 
> ---------------------------------
> Yahoo! Groups Links
> 
>    To visit your group on the web, go to:
> http://groups.yahoo.com/group/PolySix/
>   
>    To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>   
>    Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service. 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]