Yahoo Groups archive
Thread
2005-05-08 by groovedoctor23
I have problem with my korg polsix- the battery problem. I have tried to clean the klm367 board and replaced the ic30 and ic31 and also changed the battery/ not working after this . I'm not so good on electronic so I can't do anymore than this. I wonder if anyone can do the repair or have a fully working klm367 board to sell. Tommy sweden
2005-05-09 by gil_we
What are the sympthoms ? generally it is needed to retace the corroded traces and replace parts that are places over or near them. See the procedure description here: http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html --- In PolySix@yahoogroups.com, "groovedoctor23" <groovedoctor23@y...> wrote: > I have problem with my korg polsix- the battery problem. I have tried
> to clean the klm367 board and replaced the ic30 and ic31 and also > changed the battery/ not working after this . I'm not so good on > electronic so I can't do anymore than this. I wonder if anyone can do > the repair or have a fully working klm367 board to sell. > > > Tommy sweden
2005-05-10 by Tommy Lindström
The sympthoms - the synth sound strange and I can't Switch the bank led's correctly. When I switch the synth on bank 1,2,4,7 are on. + to tape, from tape and error cancel. / tommy gil_we <gil_we@yahoo.com> skrev::What are the sympthoms ? generally it is needed to retace the corroded traces and replace parts that are places over or near them. See the procedure description here: http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html --- In PolySix@yahoogroups.com, "groovedoctor23" <groovedoctor23@y...> wrote: > I have problem with my korg polsix- the battery problem. I have tried > to clean the klm367 board and replaced the ic30 and ic31 and also > changed the battery/ not working after this . I'm not so good on > electronic so I can't do anymore than this. I wonder if anyone can do > the repair or have a fully working klm367 board to sell. > > > Tommy sweden PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/PolySix/ To unsubscribe from this group, send an email to: PolySix-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
2005-05-10 by gil_we
Start be replacing the part that phisically seems as they were affected by the corrosion and retrace all bad (black) traces... does sound like a programmer problem --- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> wrote: > The sympthoms - the synth sound strange and I can't Switch the bank led's correctly. When I switch the synth on bank 1,2,4,7 are on. + to tape, from tape and error cancel. / tommy > gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it is needed to retace the corroded > traces and replace parts that are places over or near them. > > See the procedure description here: > > http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html > > > > > --- In PolySix@yahoogroups.com, "groovedoctor23" <groovedoctor23@y...> > wrote: > > I have problem with my korg polsix- the battery problem. I have > tried > > to clean the klm367 board and replaced the ic30 and ic31 and also > > changed the battery/ not working after this . I'm not so good on > > electronic so I can't do anymore than this. I wonder if anyone can do > > the repair or have a fully working klm367 board to sell. > > > > > > Tommy sweden > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > --------------------------------- > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/PolySix/ > > To unsubscribe from this group, send an email to: > PolySix-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> > > > > [Non-text portions of this message have been removed]
2005-05-10 by Tommy Lindström
How to retrace? Can someone who not have done this before do it? What do you mean programmer problem? I have already replaced the ic30 and ic31. / tommy gil_we <gil_we@yahoo.com> skrev::Start be replacing the part that phisically seems as they were affected by the corrosion and retrace all bad (black) traces... does sound like a programmer problem --- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> wrote: > The sympthoms - the synth sound strange and I can't Switch the bank led's correctly. When I switch the synth on bank 1,2,4,7 are on. + to tape, from tape and error cancel. / tommy > gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it is needed to retace the corroded > traces and replace parts that are places over or near them. > > See the procedure description here: > > http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html > > > > > --- In PolySix@yahoogroups.com, "groovedoctor23" <groovedoctor23@y...> > wrote: > > I have problem with my korg polsix- the battery problem. I have > tried > > to clean the klm367 board and replaced the ic30 and ic31 and also > > changed the battery/ not working after this . I'm not so good on > > electronic so I can't do anymore than this. I wonder if anyone can do > > the repair or have a fully working klm367 board to sell. > > > > > > Tommy sweden > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > --------------------------------- > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/PolySix/ > > To unsubscribe from this group, send an email to: > PolySix-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > [Non-text portions of this message have been removed] PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/PolySix/ To unsubscribe from this group, send an email to: PolySix-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
2005-05-10 by Tommy Lindström
Also I changed the diode but wasn't sure if the diode that I have is the right? What kind of diode is the right? / tommy gil_we <gil_we@yahoo.com> skrev::Start be replacing the part that phisically seems as they were affected by the corrosion and retrace all bad (black) traces... does sound like a programmer problem --- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> wrote: > The sympthoms - the synth sound strange and I can't Switch the bank led's correctly. When I switch the synth on bank 1,2,4,7 are on. + to tape, from tape and error cancel. / tommy > gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it is needed to retace the corroded > traces and replace parts that are places over or near them. > > See the procedure description here: > > http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html > > > > > --- In PolySix@yahoogroups.com, "groovedoctor23" <groovedoctor23@y...> > wrote: > > I have problem with my korg polsix- the battery problem. I have > tried > > to clean the klm367 board and replaced the ic30 and ic31 and also > > changed the battery/ not working after this . I'm not so good on > > electronic so I can't do anymore than this. I wonder if anyone can do > > the repair or have a fully working klm367 board to sell. > > > > > > Tommy sweden > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > --------------------------------- > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/PolySix/ > > To unsubscribe from this group, send an email to: > PolySix-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > [Non-text portions of this message have been removed] PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 --------------------------------- Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/PolySix/ To unsubscribe from this group, send an email to: PolySix-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
2005-05-10 by gil_we
Send it to recovery. --- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> wrote: > How to retrace? Can someone who not have done this before do it? What do you mean programmer problem? I have already replaced the ic30 and ic31. / tommy > > gil_we <gil_we@y...> skrev::Start be replacing the part that phisically seems as they were > affected by the corrosion and retrace all bad (black) traces... does > sound like a programmer problem > > > --- In PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...> > wrote: > > The sympthoms - the synth sound strange and I can't Switch the bank > led's correctly. When I switch the synth on bank 1,2,4,7 are on. + > to tape, from tape and error cancel. / tommy > > gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it > is needed to retace the corroded > > traces and replace parts that are places over or near them. > > > > See the procedure description here: > > > > http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html > > > > > > > > > > --- In PolySix@yahoogroups.com, "groovedoctor23" > <groovedoctor23@y...> > > wrote: > > > I have problem with my korg polsix- the battery problem. I have > > tried > > > to clean the klm367 board and replaced the ic30 and ic31 and also > > > changed the battery/ not working after this . I'm not so good on > > > electronic so I can't do anymore than this. I wonder if anyone > can do > > > the repair or have a fully working klm367 board to sell. > > > > > > > > > Tommy sweden > > > > > > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > > > > > --------------------------------- > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/PolySix/ > > > > To unsubscribe from this group, send an email to: > > PolySix-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service. > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 > > > > --------------------------------- > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/PolySix/ > > To unsubscribe from this group, send an email to: > PolySix-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> > > > > [Non-text portions of this message have been removed]