I really need to scan in the orignal artwork image. That will have to
wait until I'm back from a trip though. In the meantime, try using this
image of the layout I made for my replacement KLM-367s:
http://www.oldcrows.net/~oldcrow/synth/korg/polysix/crowlm367/klm367a_img.gif
The traces are for the most part routed exactly the same way as on an
original board; most of the changes are due to this being CAD artwork
instead of a manually-taped artwork piece. Still, it should be useful to
verify trace paths.
Crow
/**/
wait until I'm back from a trip though. In the meantime, try using this
image of the layout I made for my replacement KLM-367s:
http://www.oldcrows.net/~oldcrow/synth/korg/polysix/crowlm367/klm367a_img.gif
The traces are for the most part routed exactly the same way as on an
original board; most of the changes are due to this being CAD artwork
instead of a manually-taped artwork piece. Still, it should be useful to
verify trace paths.
Crow
/**/
On Thu, 2 Dec 2004, henrikthedj wrote:
> I'm Trying to fix the KLM-367 card, bur need a copy of the PCB
> layout.