Discussion about the Korg PolySix synthesizer

I'm Trying to fix the KLM-367 card, bur need a copy of the PCB
layout. 

Someone did a repair and a battery change, but it doesn't work any
more. The standard fix included with changing to a Lithium battery
(removing C40, and replacing R91 with a diode) has not been done, but
IC31 has been replaced and there is some other wierd wireing and some
cut traces.

The machine has got no memory, randomly lit LED's, distortion, knobs
not reacting and some other bizarre behaivour. 

Been looking all over but could only find partial scans. I want the
whole thing, both sides.

If anyone knows where to find it let me know.

By the way, is it OK with a 3 V battery? Would it be possible to
remove the battery totally? I don't really need the memory.
Could it be some other card that's giving me trouble?

All help appreciated.

Got my Polysix for free. Hooray! (Just got to fix it)
Henrik The DJ hzel@hotmail.com

I really need to scan in the orignal artwork image.  That will have to 
wait until I'm back from a trip though.  In the meantime, try using this 
image of the layout I made for my replacement KLM-367s:

http://www.oldcrows.net/~oldcrow/synth/korg/polysix/crowlm367/klm367a_img.gif

  The traces are for the most part routed exactly the same way as on an 
original board; most of the changes are due to this being CAD artwork 
instead of a manually-taped artwork piece.  Still, it should be useful to 
verify trace paths.

Crow
/**/

On Thu, 2 Dec 2004, henrikthedj wrote:

> I'm Trying to fix the KLM-367 card, bur need a copy of the PCB
> layout.

OMG!  That's perfect.  Very handy.  I can't wait to dig into another 
Polysix now that I've some more experience under my belt.


--- In PolySix@yahoogroups.com, The Old Crow <oldcrow@o...> wrote:
> 
>   I really need to scan in the orignal artwork image.  That will 
have to 
> wait until I'm back from a trip though.  In the meantime, try using 
this 
> image of the layout I made for my replacement KLM-367s:
> 
> 
http://www.oldcrows.net/~oldcrow/synth/korg/polysix/crowlm367/klm367a_
img.gif
> 
>   The traces are for the most part routed exactly the same way as 
on an 
> original board; most of the changes are due to this being CAD 
artwork 
> instead of a manually-taped artwork piece.  Still, it should be 
useful to 

> verify trace paths.
> 
> Crow
> /**/
> 
> On Thu, 2 Dec 2004, henrikthedj wrote:
> 
> > I'm Trying to fix the KLM-367 card, bur need a copy of the PCB
> > layout.