Discussion about the Korg PolySix synthesizer group photo

Yahoo Groups archive

Discussion about the Korg PolySix synthesizer

Index last updated: 2026-04-28 23:40 UTC

Message

Re: [PolySix] Knob/KLM-371 Question

2004-03-12 by Johannes Hausensteiner

1)
    +----------+-------+
    |Inh C B A |  Com  |
    +----------+-------+
    | 0  0 0 0 | Inp 0 |
    | 0  0 0 1 | Inp 1 |
    | 0  0 1 0 | Inp 2 |
    | 0  0 1 1 | Inp 3 |
    | 0  1 0 0 | Inp 4 |
    | 0  1 0 1 | Inp 5 |
    | 0  1 1 0 | Inp 6 |
    | 0  1 1 1 | Inp 7 |
    | 1  x x x | Hi Z  |
    +----------+-------+

2) see attachment

3)
    +-------------------+----------+---+
    |CN03- 1 EFF.SP/INT | -5V..+5V | a |
    |      2 CHO        |  0V/+5V  | d |
    |      3 PHA        |  0V/+5V  | d |
    |      4 ENS        |  0V/+5V  | d |
    |      5 VCA MOD    |  1Vp-p   | a |
    |      6 P.VOL      |  0V..+5V | a |
    |      7 RESO       |  0V..+10V| a |
    +-------------------+----------+---+
    |CN05- 1 EG MODE    |  0V/+5V  | d |
    |      2 SUB OFF    |  0V/+5V  | d |
    |      3 SUB 1/2    |  0V/+5V  | d |
    |      4 /|         |  0V/+5V  | d |
    |      5 RELEASE    | -5V..+5V | a |
    |      6 SUSTAIN    | -5V..+5V | a |
    |      7 DECAY      | -5V..+5V | a |
    |      8 ATTACK     | -5V..+5V | a |
    |      9 RESO       |  0V..+10V| a |
    |     10 EG INT     | -5V..+5V | a |
    |     11 PW/PWM     | 0.2..2.4V| a |
    |     12 VCO MOD    |          | a |
    |     13 VCF MOD/CF |-7.5..7.5V| a |
    |     14 KBD TRACK  | -5V..+5V | a |
    |     15 TE         |  0V/+5V  | d |
    |     16 ST         |  0V/+5V  | d |
    |     17 4'         |  0V/+5V  | d |
    |     18 8'         |  0V/+5V  | d |
    |     19 IR         |  0V/+5V  | d |
    +-------------------+----------+---+


Stefan Rinass wrote:
> Hi all,
> 
> i have a few questions. Does anyone know how the ABC-Lines for the 
> 4051´s located on KLM-370 are coded (Inhibit 0/1, Line A/B/C = Knob ?)
> 
> 2nd question is Connector CN10, how is it driven? Is it a pure 
> Key-Matrix-Driver?
> 
> 3rd quesion is CN05 and CN03, are the driving Voltages pure +5 and -5 Volts?
> 
> Thanks
> 
> Stef
> 
> 
> 
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 


[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.