Discussion about the Korg PolySix synthesizer

Thanks for the pointer to Syntaur.com for replacement parts.  I added that to the page as well!

Chip

--- In PolySix@yahoogroups.com, "syntegrator" <me@...> wrote:
>
> 
> Syntaur.com has new replacement frames, but there's a surprise as to where they originally come from - There's a newer keyboard that uses frames that are compatible with Polysix.
> 
> Check out this YouTube video for details: 
> 
> http://www.youtube.com/watch?v=HGuNUtd9rQs
> 
> Cheers,
> 
> Syntegrator
> 
> --- In PolySix@yahoogroups.com, "tonezone020" <swamp.gigs@> wrote:
> >
> > Hi All,
> > 
> > Anyone here know where I can get replacement frames ?
> > 
> > Thanks - Tony
> > 
> > --- In PolySix@yahoogroups.com, "backshall1" <backshall1@> wrote:
> > >
> > > Hi Chip,
> > > 
> > >  
> > > 
> > > I think it is misleading to say there are only two main parts, the button
> > > and the button cover. I think it should more explicitly say that there are
> > > four parts, including the LED. The "button cover" is two pieces, the frame
> > > and the cap. The cap is the colored part (gray, beige, red, orange) and the
> > > frame is black. Make sure you mention to NOT try to remove the cap from the
> > > frame, as this usually results in breaking the little black plastic hinges
> > > that hold it on. You must remove the frame, cap and LED (three pieces)
> > > together, after unsoldering the LED.
> > > 
> > >  
> > > 
> > > Don B.
> > > 
> > >  
> > > 
> > >   _____  
> > > 
> > > From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
> > > chipaudette
> > > Sent: Sunday, June 02, 2013 9:34 AM
> > > To: PolySix@yahoogroups.com
> > > Subject: [PolySix] Instructions for Replacing a Push-Button
> > > 
> > >  
> > > 
> > >   
> > > 
> > > I choose to replace another push-button yesterday. This time, I took a bunch
> > > of pictures and wrote up the process.
> > > 
> > > So, if anyone needs to replace a push-button, but didn't know how, maybe
> > > this post will be helpful to you...
> > > 
> > > http://synthhacker.blogspot.com/2013/06/polysix-replacing-push-button.html
> > > 
> > > Anyone got any improvements or suggestions?
> > > 
> > > Chip
> > > 
> > > 
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
>