Discussion about the Korg PolySix synthesizer

I have two boards I could part with. One is pictured on the web page and 
the other is in similar condition. One is from an 'Early Production' 
model and the other a later model. As far as I know nether work but I 
have not turned them on so I do not know for sure. Both are complete and 
still have the original leaking batteries on (which I can remove).

MH

On 25/01/2013 6:50 p.m., raisinbag69 wrote:
>
> GREAT! Thanks. It's a pain to have to order one part, when you have 
> everything else on hand.
>
> Holy crap, I just read about the Kiwisix, I hadn't heard of that 
> before, way cool. Midi is something I want to implement into my P6 at 
> some point. So you have fully loaded boards that you pulled?
>
> --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com>, 
> Murray wrote:
> >
> > Any Zener of the correct voltage and the same or larger wattage will
> > work. The one in the board looks to be 1/2W or less so use a 1/2W or
> > greater replacement. I have a few boards left over from fitting Kiwisix
> > upgrades if you want an original.
> >
> > MH
> >
> >
> > On 25/01/2013 6:21 p.m., raisinbag69 wrote:
> > >
> > > Hi, I am rebuilding a 367 board I got from Jed, and stuffing it right
> > > now. Going off his BOM it calls for a 3.9v Zener, specifically a
> > > BZX79-C3V9. I have a bunch of 1N5228b 3.9v zeners in hand, can 
> anybody
> > > tell me if they will work the same? I looked at Data sheets to
> > > compare, but am not fully understanding, due to my lack of Zener
> > > knowledge.
> > >
> > > Cheers, Dave
> > >
> > >
> >
> > --
> > Kind Regards
>
> > Murray
>
> > murray@...
>
> > www.paintingwithsound.co.nz
>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
> 

-- 
Kind Regards<br>
Murray<br>
murray@paintingwithsound.co.nz<br>
www.paintingwithsound.co.nz<br>



[Non-text portions of this message have been removed]