Any Zener of the correct voltage and the same or larger wattage will
work. The one in the board looks to be 1/2W or less so use a 1/2W or
greater replacement. I have a few boards left over from fitting Kiwisix
upgrades if you want an original.
MH
work. The one in the board looks to be 1/2W or less so use a 1/2W or
greater replacement. I have a few boards left over from fitting Kiwisix
upgrades if you want an original.
MH
On 25/01/2013 6:21 p.m., raisinbag69 wrote:
>
> Hi, I am rebuilding a 367 board I got from Jed, and stuffing it right
> now. Going off his BOM it calls for a 3.9v Zener, specifically a
> BZX79-C3V9. I have a bunch of 1N5228b 3.9v zeners in hand, can anybody
> tell me if they will work the same? I looked at Data sheets to
> compare, but am not fully understanding, due to my lack of Zener
> knowledge.
>
> Cheers, Dave
>
>
--
Kind Regards<br>
Murray<br>
murray@paintingwithsound.co.nz<br>
www.paintingwithsound.co.nz<br>
[Non-text portions of this message have been removed]