Discussion about the Korg PolySix synthesizer

From your description, everything is working correctly.
The mod wheel on the Polysix is hardwired to the VCO -- it does not 
affect anything else.
The controls on the front panel for modulation to the VCO/VCF/VCA are 
part of the patch programming, and are totally independent of the 
wheel.  This is unlike other synths, but it's the way the Polysix was 
designed.
(this info is contained in the user manual, available several places for 
free download).

Sounds like your synth is working the way it was designed.

~G


djangowes wrote:
>  
>
> Hello all,
>
> I've had a P6 for a year and I there is an issue about the modwheel.
> What it does is:
> _when Mod switch is set at VCO, then modwheel affects VCO pitch. It's OK.
> _when Mod switch is set at VCF, modwheel modulates VCF AND VCO... KO.
> _when Mod switch is set at VCA, modwhell modulates VCA AND VCO... KO.
>
> So the two last position shows an issue. It is not supposed to 
> modulate VCO each time.
> On the other hand it works nice when using MG with pots on control panel.
>
> Modwheel is linked to KLM369 then signal reaches KLM367.
> Problem with modswitch? I wonder where i should start to find the culprit.
> Does anybody know when the issue could come from?
> Thanks for any kind of help.
>
> rgds,
>
> Ed.
>
> 



[Non-text portions of this message have been removed]