Discussion about the Korg PolySix synthesizer

Everything is up-to-date on my site.

Best of luck in your build!

Jed

On Thu, Oct 14, 2010 at 2:05 AM, Andrew Jury <andy@networkjabber.com> wrote:

>
>
> Mike,
>
> 1. As far as I am aware this is all up to date. I have a personal list I
> work from and this has served me for over 10 boards. If you�d rather work
> from my copy then drop me a line, however, it is utterly reliant on
> supplies
> from Farnell/Newark.
> 2. Make sure the mods round R53 and R92 are done. We have two missing
> tracks. More details on Jed�s site. Make sure C22 and C23 are both 10pF
> 3. No. I have over ten working
> 4. You can use the calibration notes from the original Korg service manual
> without any issues
> 5. You might be referring to the problem with C23/C23. Make sure they are
> both 10pF. Again over 10 boards say �yes� it is solved.
> 6. I am just about to add the MIDI kit to a P6 which has the clone board.
> This kit is the one designed by Steinhauser/Wolf, which I gather is based
> on
> the original �M� board. I will let you know how it goes!
>
> Good luck with the build,
> Andy
>
>
> On 14/10/2010 09:42, "Mike" <mborish_2000@yahoo.com<mborish_2000%40yahoo.com>>
> wrote:
>
> >
> >
> >
> >
> >
> > So, I got a KLM 367 in the mail last week and am planning on populating
> it
> > sometime this week. (Thanks Jed!) If it's not too much trouble, I've got
> a few
> > simple questions for everyone on this board:
> >
> > 1.) Is all of the part information up to date on Jed's page? I am going
> to
> > cut and paste the parts list - this will work?
> >
> > 2.) What are the major pitfalls I should look out for when populating and
> > calibrating this thing?
> >
> > 3.) Are there any known issues that haven't been solved yet? If there
> are,
> > I'm going to wait.
> >
> > 4.) Calibration is the same as the service notes that have been floating
> > around the net for the last few years?
> >
> > 5.) Was the corruption issue ever solved? I remember reading about some
> folks
> > swapping caps and pulling their hair out because of some sort of data
> > corruption or stray capacitance?
> >
> > 6.) My board has Korg factory midi.... Has anyone replaced the KLM 367
> with
> > Factory MIDI?
> >
> > -Mike
> >
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]