Discussion about the Korg PolySix synthesizer

Hallo to all polysix lovers!

that' the question:

My P6 was not saving sound anymore after I put factory sound in it.

...I mean something was saved but with a very close cut off , only a clik was saved on the bank...

So I thougt  ...bad battery...no the battery was still good from the last time I replaced it (1999)  the voltage is ok ,

 no leakeage, exept for the old one from ten years ago.

...Maybe I have to do the procedure to calibrate everything.....ok , I put 56K resistor on the psu board...I set the voltages but

when I disconnected the resistor ....(probably I shorted the pins) ...nothing flikering led on the bank...

..trying to switch from manual to test (desperation start)

--I have to say that the battery was not on----

and now---

dead.no sound ,only all les on  .

panic   : I checked the klm 367 board but is ok...(before was working)

I still have the old battery ,but the voltage is ok 4v

probably uP or some logic port are dead (killed)

I don't know what to do...
sorry for my english ,
pietro



[Non-text portions of this message have been removed]