Discussion about the Korg PolySix synthesizer

Thanks Andy!

I really appreciate your help with my beloved Polysix.

Last night I tried to switch the VCO's (SSM 2056) but no change in
which voice was distorted.

Just a summary:
* All voices are equally out of tune
* 2 voices have a "distorted" effect. I will record and post a
sample... -however the frequency of the distortion changes during the
initial self-tuning procedure.
* All controlls/keys works perfectly
* My tests are performed in manual mode with cutoff=10 and resonance=0

Cheers,
Peter

--- In PolySix@yahoogroups.com, "Andrew Jury" <andy@...> wrote:
> we have an extra days holiday here in the UK tomorrow and I will have 
> a bit more of a poke around inside. I'll let you know...
> 
> Cheers,
> Andy
> 
> 
> --- In PolySix@yahoogroups.com, "hjulskov" <hjulskov@> wrote:
> >
> > Hi Andy
> > 
> > Sorry to confuse you -all controlls works as they should. I just
> > wanted to clearify that the distortion on two of the voices wasn't
> > caused by either MG, PWM or effect.
> > 
> > I'll try to swich the SSM's around to see if that changes which 
> voices
> > are distorted.
> > 
> > And as an additional information -I ofcause changed the battery to a
> > lithium within 24 hours after I bought it. And luckily the old 
> battery
> > had not leaked yet :-)
> > 
> > Have a nice weekend too :-)
> > 
> > Peter
> > 
> > 
> > > The act of you placing your DVM probes in-circuit is changing the 
> > > eletrical characteristics of it. Hence, the changes in the sound. 
> Did 
> > > you I hear you right? Did you just say that the MG, PWM and 
> effect 
> > > frequency controls aren't working either?! If so I would be 
> looking 
> > > for disconnected tracks on the KLM-367 as a priority!
> > > 
> > > I'll get you some comparisons after the weekend.
> >
>