A logic probe is an electronic testing tool. On Wed, Aug 20, 2008 at 11:44 AM, hjulskov <hjulskov@yahoo.com> wrote: > Thanks Andy, > > The LEDS (D10) does light in order in polymode (which I think was what > you meant?) -in unison they all light simultaniously. > In Polymode all voices sounds equally (bad). > > > I'm not sure about your last question (Can you lay your hands on a > logic probe at all?)? > > > Cheers, > Peter > > > --- In PolySix@yahoogroups.com, "Andrew Jury" <andy@...> wrote: >> >> Hi Peter, >> >> I am afraid we can't make that assumption until the logic that controls >> IC31 has been tested. This device is basically a switch. You apply a >> binary pattern to lines A, B, C and INH and this determines which one >> of the outputs is connected to the input. The input is marked X the >> outputs marked X0, X1, X2, etc. It is the outputs which we just tested >> and which don't seem to move. Tell me, do the voice LEDs (D10) come on >> in order in Unison mode? Everytime you press a key an alternate voice >> LED should light up. I suspect not? >> >> Can you lay your hands on a logic probe at all? >> >> Cheers, >> Andy >> > > > > ------------------------------------ > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo! Groups Links > > > > -- .sig -Chromatest J. Pantsmaker http://www.chromatest.net
Message
Re: [PolySix] Re: Suddenly out of tune -but still problems after changing PC-1 and R93
2008-08-20 by Chromatest J. Pantsmaker
Attachments
- No local attachments were found for this message.