Discussion about the Korg PolySix synthesizer

yeah that's the one i'm looking at.

On 4/12/06, gil_we <gil_we@yahoo.com> wrote:
> check the one made by spider labs
>
>
> --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
> >
> > i decided i'll etch the board myself. now - is there anyone that
> could
> > get me an already programmed PIC? or maybe point me to a good
> (tested)
> > schematic for a burner?
> >
> > what PICs are used in this project nowadays? can the PIC16F84 still
> be bought?
> >
> > cheers,
> > jure
> >
> > On 3/26/06, gil_we <gil_we@...> wrote:
> > > Take into consideration that the components themselves cost about
> 25
> > > $, not to mention the burning of the IC (I made two so far)
> > >
> > >
> > > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@> wrote:
> > > >
> > > > any chance to order just the board?
> > > >
> > > > On 3/23/06, cavernosum7 <klosmon@> wrote:
> > > > > Hello-
> > > > > Wanted to let everyone know that I've received a new batch of
> MIDI
> > > > > boards for the Polysix.
> > > > > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in
> Poly
> > > mode,
> > > > > channel selectable via Sysex command.
> > > > > I'm offering them for $70 installed & tested.
> > > > > Details at:
> > > > > http://www.analogsynthservice.com/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>