Discussion about the Korg PolySix synthesizer

Hello-
Wanted to let everyone know that I've received a new batch of MIDI 
boards for the Polysix.
This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly mode, 
channel selectable via Sysex command.
I'm offering them for $70 installed & tested.
Details at:
http://www.analogsynthservice.com/

any chance to order just the board?

On 3/23/06, cavernosum7 <klosmon@sbcglobal.net> wrote:
> Hello-
> Wanted to let everyone know that I've received a new batch of MIDI
> boards for the Polysix.
> This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly mode,
> channel selectable via Sysex command.
> I'm offering them for $70 installed & tested.
> Details at:
> http://www.analogsynthservice.com/
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>

I can offer boards that you can easily mount by yourself.
35EUR with shipping worldwide.
Just the board (assembled and tested), you provide the DIN
socket, this way shipping is much easier.
Solder the board directly to bottom side of  keyboard's connector
in P6, attach 2 short wires for GND and power, and MIDI socket
with the cable.

Roman

----- Original Message ----- 

From: "jure zitnik" <kokoon@gmail.com>
To: <PolySix@yahoogroups.com>
Sent: Thursday, March 23, 2006 6:09 PM
Subject: Re: [PolySix] Polysix MIDI boards


> any chance to order just the board?
> 
> On 3/23/06, cavernosum7 <klosmon@sbcglobal.net> wrote:
> > Hello-
> > Wanted to let everyone know that I've received a new batch of MIDI
> > boards for the Polysix.
> > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly mode,
> > channel selectable via Sysex command.
> > I'm offering them for $70 installed & tested.
> > Details at:
> > http://www.analogsynthservice.com/
> >
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> 
> 
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6 
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>

At 09:09 AM 3/23/2006, you wrote:
>any chance to order just the board?

Hi-
sorry, no -- the boards are already stuffed.
You CAN get just the board from Roman, on this list (see his posting today).

If cost is really a factor, this is a fairly straightforward DIY project -- 
just get all the parts listed on the SpiderRoom site, wire up the circuit 
on some perfboard, get hold of a PIC programmer, program the PIC, open up 
your synth & wire the new board onto the voice board per his instructions, 
drill a hole in the back of the synth for mounting the MIDI jack, wire it 
up & test it.

~G

>On 3/23/06, cavernosum7 <klosmon@sbcglobal.net> wrote:
> > Hello-
> > Wanted to let everyone know that I've received a new batch of MIDI
> > boards for the Polysix.
> > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly mode,
> > channel selectable via Sysex command.
> > I'm offering them for $70 installed & tested.
> > Details at:
> > <http://www.analogsynthservice.com/>http://www.analogsynthservice.com/
> >
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: 
> <http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>PolySix "Digiest" Page: 
><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly6
>
>
>
>SPONSORED LINKS
><http://groups.yahoo.com/gads?t=ms&k=Electronic+instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&c=5&s=126&.sig=j3TK8h6GNpD5AMFN0TJA3A>Electronic 
>instrument 
><http://groups.yahoo.com/gads?t=ms&k=Synthesizer+music&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&c=5&s=126&.sig=tmTLRMUurlUEhehue_lx3A>Synthesizer 
>music 
><http://groups.yahoo.com/gads?t=ms&k=Electronic+music&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&c=5&s=126&.sig=PkktJzelnl06zWnwP49VaA>Electronic 
>music
><http://groups.yahoo.com/gads?t=ms&k=Music+sampler&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&c=5&s=126&.sig=gWsxSSKEGxZQckBqBLtSXg>Music 
>sampler 
><http://groups.yahoo.com/gads?t=ms&k=Electronic+musical+instrument&w1=Electronic+instrument&w2=Synthesizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&c=5&s=126&.sig=0ggbCcIf2B7r1P8g9cEGtw>Electronic 
>musical instrument
>
>
>----------
>YAHOO! GROUPS LINKS
>
>    *  Visit your group "<http://groups.yahoo.com/group/PolySix>PolySix" 
> on the web.
>    *
>    *  To unsubscribe from this group, send an email to:
>    * 
> <mailto:PolySix-unsubscribe@yahoogroups.com?subject=Unsubscribe>PolySix-unsubscribe@yahoogroups.com 
>
>    *
>    *  Your use of Yahoo! Groups is subject to the 
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>
>----------


[Non-text portions of this message have been removed]

Take into consideration that the components themselves cost about 25
$, not to mention the burning of the IC (I made two so far)


--- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
>
> any chance to order just the board?
> 
> On 3/23/06, cavernosum7 <klosmon@...> wrote:
> > Hello-
> > Wanted to let everyone know that I've received a new batch of MIDI
> > boards for the Polysix.
> > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly 
mode,

> > channel selectable via Sysex command.
> > I'm offering them for $70 installed & tested.
> > Details at:
> > http://www.analogsynthservice.com/
> >
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>

i decided i'll etch the board myself. now - is there anyone that could
get me an already programmed PIC? or maybe point me to a good (tested)
schematic for a burner?

what PICs are used in this project nowadays? can the PIC16F84 still be bought?

cheers,
jure

On 3/26/06, gil_we <gil_we@yahoo.com> wrote:
> Take into consideration that the components themselves cost about 25
> $, not to mention the burning of the IC (I made two so far)
>
>
> --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
> >
> > any chance to order just the board?
> >
> > On 3/23/06, cavernosum7 <klosmon@...> wrote:
> > > Hello-
> > > Wanted to let everyone know that I've received a new batch of MIDI
> > > boards for the Polysix.
> > > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly
> mode,
> > > channel selectable via Sysex command.
> > > I'm offering them for $70 installed & tested.
> > > Details at:
> > > http://www.analogsynthservice.com/
> > >
> > >
> > >
> > >
> > >
> > >
> > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

check the one made by spider labs


--- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
>
> i decided i'll etch the board myself. now - is there anyone that 
could
> get me an already programmed PIC? or maybe point me to a good 
(tested)
> schematic for a burner?
> 
> what PICs are used in this project nowadays? can the PIC16F84 still 
be bought?
> 
> cheers,
> jure
> 
> On 3/26/06, gil_we <gil_we@...> wrote:
> > Take into consideration that the components themselves cost about 
25
> > $, not to mention the burning of the IC (I made two so far)
> >
> >
> > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@> wrote:
> > >
> > > any chance to order just the board?
> > >
> > > On 3/23/06, cavernosum7 <klosmon@> wrote:
> > > > Hello-
> > > > Wanted to let everyone know that I've received a new batch of 
MIDI
> > > > boards for the Polysix.
> > > > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in 
Poly

> > mode,
> > > > channel selectable via Sysex command.
> > > > I'm offering them for $70 installed & tested.
> > > > Details at:
> > > > http://www.analogsynthservice.com/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>

yeah that's the one i'm looking at.

On 4/12/06, gil_we <gil_we@yahoo.com> wrote:
> check the one made by spider labs
>
>
> --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
> >
> > i decided i'll etch the board myself. now - is there anyone that
> could
> > get me an already programmed PIC? or maybe point me to a good
> (tested)
> > schematic for a burner?
> >
> > what PICs are used in this project nowadays? can the PIC16F84 still
> be bought?
> >
> > cheers,
> > jure
> >
> > On 3/26/06, gil_we <gil_we@...> wrote:
> > > Take into consideration that the components themselves cost about
> 25
> > > $, not to mention the burning of the IC (I made two so far)
> > >
> > >
> > > --- In PolySix@yahoogroups.com, "jure zitnik" <kokoon@> wrote:
> > > >
> > > > any chance to order just the board?
> > > >
> > > > On 3/23/06, cavernosum7 <klosmon@> wrote:
> > > > > Hello-
> > > > > Wanted to let everyone know that I've received a new batch of
> MIDI
> > > > > boards for the Polysix.
> > > > > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in
> Poly
> > > mode,
> > > > > channel selectable via Sysex command.
> > > > > I'm offering them for $70 installed & tested.
> > > > > Details at:
> > > > > http://www.analogsynthservice.com/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>

hello.

is this still possible? would you accept paypal? i'm from slovenia (EU)

cheers,
jure

On 3/23/06, Roman <modular@go2.pl> wrote:
>
> I can offer boards that you can easily mount by yourself.
> 35EUR with shipping worldwide.
> Just the board (assembled and tested), you provide the DIN
> socket, this way shipping is much easier.
> Solder the board directly to bottom side of  keyboard's connector
> in P6, attach 2 short wires for GND and power, and MIDI socket
> with the cable.
>
> Roman
>
> ----- Original Message -----
> From: "jure zitnik" <kokoon@gmail.com>
> To: <PolySix@yahoogroups.com>
> Sent: Thursday, March 23, 2006 6:09 PM
> Subject: Re: [PolySix] Polysix MIDI boards
>
>
> > any chance to order just the board?
> >
> > On 3/23/06, cavernosum7 <klosmon@sbcglobal.net> wrote:
> > > Hello-
> > > Wanted to let everyone know that I've received a new batch of MIDI
> > > boards for the Polysix.
> > > This is the SpiderRoom Labs MIDI;  just a simple MIDI In in Poly mode,
> > > channel selectable via Sysex command.
> > > I'm offering them for $70 installed & tested.
> > > Details at:
> > > http://www.analogsynthservice.com/
> > >
> > >
> > >
> > >
> > >
> > >
> > > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>
>


[Non-text portions of this message have been removed]