--- Thanks once again for your quick response. This will "hopefully" narrow diagnosing time for me. Looks like I'll better get my soldering iron and a wire out. In PolySix@yahoogroups.com, klosmon <klosmon@s...> wrote: > Correct -- even in Manual mode, it won't work. > The Polysix (& other "memory" synths) runs ALL of its control voltages thru > the CPU -- any problem on the data or address lines will be reflected in > the synth audio section. > I've never seen a battery-damaged P6 that didn't need at least SOME trace > repair -- if you're fairly comfortable with reading schematics & tracing > circuitry, this is do-able. If you're not, you might want to call in some > help. > > ~G > > At 12:02 PM 10/6/2005, you wrote: > >--- Thanks for your response. If I read you comments right, you say > >that if the traces to the processor or IC31 are damaged you possibly > >will not get any sound? Does this also hold true if you try to play > >it in "manual mode"? > >I did take out the old battery and tied in a fresh battery to see if > >I could get sound out of it but no luck. There was a little acid > >leak which I cleaned up and did a "quick" continuity on the traces > >around the chip which seemed to be fine. Obviously that does not mean > >traces underneath or the vias are good. Please confirm that in deed > >if traces are bad even if in maunal mode I will not get sound. > >Thanks. > > > > > > > > > > > > > >In PolySix@yahoogroups.com, "Seppo Sipilä" <Seppo.Sipila@m...> wrote: > > > > and stable. Powered it up and I still have no sound. CAn anyone > >tel > > > > me if this is a Battery issue. I would think a battery leak > >problem > > > > would not allow you to store but would it cause NO SOUND? Looking > > > > for some areas to next look at. > > > > > > The battery leak on my Polysix was very hard to see, but it damaged > > > the memory circuit board and the nearest chip underneath so that I > > > had complete sound loss and several memory lights lighting up at > >the > > > same time. The damage screwed up the memory board so that the poor > > > thing didn't know what settings to use and went silent instead. > > > > > > Just in case someone doesn't know this yet: if you have a Polysix > > > that has never had the battery replaced, DO IT NOW. The battery is > > > more than 20 years old and just waiting to leak corrosively all > >over > > > the memory circuit board. If it hasn't done so yet, you've been > >lucky > > > - but it won't last. I found this out the hard way (luckily I had > >my > > > patches backed up just recently and a soldering wizard of a friend > >to > > > do the repair job properly). > > > > > > Now it works perfectly again with a modern metal hydride battery, > >but > > > it was a much bigger soldering & chip-replacing job than just > > > replacing the old battery before it leaks. There are excellent > > > Polysix battery leak repair instructions on Old Crow's pages > >(thanks > > > a 1000000): > > <http://www.oldcrows.net/~oldcrow/synth/korg/polysix/>http://www.oldcr ows.net/~oldcrow/synth/korg/polysix/ > > > > > > S. > > > > > > > > > >PolySix "Digiest" Page: > ><http://www.acc.umu.se/~amber/Poly6>http://www.acc.umu.se/~amber/Poly 6 > > > > > > > >SPONSORED LINKS > ><http://groups.yahoo.com/gads? t=ms&k=Electronic+instrument&w1=Electronic+instrument&w2=Synthesizer+m usic&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instru ment&w6=Electronic+instrument+cases&c=6&s=159&.sig=ci3KdjeGEOOzOvNHaWG xmQ>Electronic > >instrument > ><http://groups.yahoo.com/gads? t=ms&k=Synthesizer+music&w1=Electronic+instrument&w2=Synthesizer+music &w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument &w6=Electronic+instrument+cases&c=6&s=159&.sig=QZq091SziMTvPtOVeLgMTw> Synthesizer > >music > ><http://groups.yahoo.com/gads? t=ms&k=Electronic+music&w1=Electronic+instrument&w2=Synthesizer+music& w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument& w6=Electronic+instrument+cases&c=6&s=159&.sig=gS9LoWt8tZBE5FT38B1aTg>E lectronic > >music > ><http://groups.yahoo.com/gads? t=ms&k=Music+sampler&w1=Electronic+instrument&w2=Synthesizer+music&w3= Electronic+music&w4=Music+sampler&w5=Electronic+musical+instrument&w6= Electronic+instrument+cases&c=6&s=159&.sig=wsU5612joclWK2F6- IGWbQ>Music > >sampler > ><http://groups.yahoo.com/gads? t=ms&k=Electronic+musical+instrument&w1=Electronic+instrument&w2=Synth esizer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musica l+instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=HX3mWNhkkPv OuArbezM6eg>Electronic > >musical instrument > ><http://groups.yahoo.com/gads? t=ms&k=Electronic+instrument+cases&w1=Electronic+instrument&w2=Synthes izer+music&w3=Electronic+music&w4=Music+sampler&w5=Electronic+musical+ instrument&w6=Electronic+instrument+cases&c=6&s=159&.sig=aO9wB8aR9ymHL qP9yFznAQ>Electronic > >instrument cases > > > > > >---------- > >YAHOO! GROUPS LINKS > > > > * Visit your group "<http://groups.yahoo.com/group/PolySix>PolySix" > > on the web. > > * > > * To unsubscribe from this group, send an email to: > > * > > <mailto:PolySix-unsubscribe@yahoogroups.com? subject=Unsubscribe>PolySix-unsubscribe@yahoogroups.com > > > > * > > * Your use of Yahoo! Groups is subject to the > > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service. > > > > > >----------
Message
Re: Fixed Power Supply but still no sound
2005-10-06 by lnz2166
Attachments
- No local attachments were found for this message.