Hi Frank, Thanks for your concern, but no money was wasted =). I rewired the power supply for an SMS type controller card, as this pic shows (before the new caps were installed). http://img534.imageshack.us/img534/5347/m400powersupply.jpg Note: this shot was also taken before the mod to move the fuse before the power switch. Now, what about those motor brushes? =) Thanks, Chris --- In newmellotrongroup@yahoogroups.com, lsf5275@... wrote: > > Chris, if you have any kind of SMS control card and you replaced more than > the two caps closest to the front (or farthest from the mains socket), you > wasted money. They don't do anything. > > > In a message dated 7/26/2010 8:22:32 A.M. Eastern Daylight Time, > fazeka@... writes: > > I just finished recapping the power supply, now I turn my attention to the > motor. >
Message
Re: M400 motor rebuild
2010-07-26 by zogher
Attachments
- No local attachments were found for this message.