The Mellotron Group group photo

Yahoo Groups archive

The Mellotron Group

Index last updated: 2026-04-03 22:19 UTC

Thread

Volume Pot

Volume Pot

2009-09-20 by Mike Dickson

What's the spec of the volume pot on an M400, anyone?

I have to replace mine and the base is too mucky to read anything from it!

-- 
Mike Dickson, Edinburgh

Free Music Project: http://www.mikedickson.org.uk/ 
Or http://www.last.fm/music/Mike+Dickson
Or http://soundcloud.com/mikedickson
Or http://www.planetmellotron.com/revd4.htm#mikedickson

Re: [newmellotrongroup] Volume Pot

2009-09-20 by Bruce Daily

Mike-
My info sez- 10K Ohm, Audio (Log) taper. Right, Dr. Stickle?
-Bruce D.
#1221


--- On Sun, 9/20/09, Mike Dickson wrote:
Show quoted textHide quoted text

From: Mike Dickson
Subject: [newmellotrongroup] Volume Pot
To: newmellotrongroup@yahoogroups.com
Date: Sunday, September 20, 2009, 9:46 AM

What's the spec of the volume pot on an M400, anyone?

I have to replace mine and the base is too mucky to read anything from it!

--
Mike Dickson, Edinburgh

Free Music Project: http://www.mikedick son.org.uk/
Or http://www.last. fm/music/ Mike+Dickson
Or http://soundcloud. com/mikedickson
Or http://www.planetme llotron.com/ revd4.htm# mikedickson

Re: [newmellotrongroup] Volume Pot

2009-09-20 by lsf5275@aol.com

10k or 15k log.
 
 
In a message dated 9/20/2009 11:47:13 A.M. Eastern Daylight Time,  
mike.dickson@gmail.com writes:

What's  the spec of the volume pot on an M400,  anyone?

Re: [newmellotrongroup] Volume Pot

2009-09-21 by Rick Blechta


On Sep 20, 2009, at 11:46 AM, Mike Dickson wrote:

What's the spec of the volume pot on an M400, anyone?

I have to replace mine and the base is too mucky to read anything from it!

I find the specs usually come off with a bit of Javex, possibly using steel wool if they're stubborn. Of course, if you spill single malt scotch on it, then you'll have to expect to replace it -- if there's any more in the bottle.

Rick

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.