The Mellotron Group

>
>
> with the seats down? I should know this before I drive 500 miles to
> pick it up. Thanks!
>
> -Dan
> #854 (on Saturday)
>
>

>
> The standard M400 dimensions are: 34" high, 34" wide, and 22" deep. I
> have no idea what the doors will admit (or what the available volume is)
> on a 2001 Subaru Forester. I've seen it recommended that you remove the
> keyboard from the cabinet and tie down the headblock so it doesn't
> travel back and forth laterally while you're driving. I did both of
> these things on my 500 mile trip and it worked out just fine. If you
> really run into space trouble, remember you can shave three or four
> inches off the height measurement by removing the little black feet.
> Bring an adjustable wrench with you.
> have a good trip.
> john barrick
>
> PS bring along some foam or blankets to wrap the keyboard up in.
>
>
>
> DaSwans wrote:
> >
> >
> > with the seats down? I should know this before I drive 500 miles to
> > pick it up. Thanks!
> >
> > -Dan
> > #854 (on Saturday)
> >
> >
>

>
>
>
> >
> Okay. Dumb noob question: Which part exactly is the head block?
>
> Thanks for the dimensions and the tip about taking off the feet. I'll
> probably lay it down on it's back. Anything else I need to know about
> transporting it? It does have it's original protect-o-muff (tron
> bondage). That should protect the lovely brushed on latex paint job it
> received at some point.
>
> How important is the tape box cover (the aluminum thing that the tapes
> roll into when they're played)? I see it missing in a lot of pictures
> and the tron I'm buying is missing it. It seems like one could be made
> relatively easily (unless, of course, somebody out there has a spare).
> I'm sure the cover will be the least of my problems, however. I'm just
> thinking out loud and taking mental inventory of the project ahead.
>
>

The headblock is the piece with all the playback heads on it. It moves
laterally when you turn the track selector knob from a to b to c. I
just tied mine down with a couple of bread twistys. You'll want to
bring along a 1/2" inch socket wrench to remove the feet. The bolt
heads are sunk about two inches into the bottom of the feet. If you have
enough room, you obviously don't need to mess with it. It should lay
down on its back just fine - mine did. I think Ken Leonard transported
his that way in his Accura hatchback. One thing about the keyboard.
After you wrap it up, lay it down flat upside down (keys down, pressure
pads up) as you don't want to bend the pressure pad arms.

Playing without a spill box lid is inviting trouble. I've left it off
accidentally before, and tapes tend to stick (not return properly) and
sometimes they don't even go into the spill box but pile up on top
instead, which is just asking for a snag or tangle. You should be able
to acquire one from Streetly or Mellotron Archives, or I believe that at
least one person on the list has made a couple.

And while driving, allow yourself the luxury of imaging that other
drivers are wondering whether or not you're carrying a Mellotron in the
back.
best,
john barrick

PS - I also found it convenient to remove the tape frame, wrap it up in
a sheet or blanket and lay it down flat also.

DaSwans wrote:
>
>
>
> >
> Okay. Dumb noob question: Which part exactly is the head block?
>
> Thanks for the dimensions and the tip about taking off the feet. I'll
> probably lay it down on it's back. Anything else I need to know about
> transporting it? It does have it's original protect-o-muff (tron
> bondage). That should protect the lovely brushed on latex paint job it
> received at some point.
>
> How important is the tape box cover (the aluminum thing that the tapes
> roll into when they're played)? I see it missing in a lot of pictures
> and the tron I'm buying is missing it. It seems like one could be made
> relatively easily (unless, of course, somebody out there has a spare).
> I'm sure the cover will be the least of my problems, however. I'm just
> thinking out loud and taking mental inventory of the project ahead.
>
>

>
>
> Awesome, John. I printed out your comments and will use them as a
> checklist. Thanks!
>
> -Dan
> On Jun 25, 2009, at 11:45 PM, john barrick wrote:
>
>>
>>
>>
>> The headblock is the piece with all the playback heads on it. It moves
>> laterally when you turn the track selector knob from a to b to c. I
>> just tied mine down with a couple of bread twistys. You'll want to
>> bring along a 1/2" inch socket wrench to remove the feet. The bolt
>> heads are sunk about two inches into the bottom of the feet. If you have
>> enough room, you obviously don't need to mess with it. It should lay
>> down on its back just fine - mine did. I think Ken Leonard transported
>> his that way in his Accura hatchback. One thing about the keyboard.
>> After you wrap it up, lay it down flat upside down (keys down, pressure
>> pads up) as you don't want to bend the pressure pad arms.
>>
>> Playing without a spill box lid is inviting trouble. I've left it off
>> accidentally before, and tapes tend to stick (not return properly) and
>> sometimes they don't even go into the spill box but pile up on top
>> instead, which is just asking for a snag or tangle. You should be able
>> to acquire one from Streetly or Mellotron Archives, or I believe that at
>> least one person on the list has made a couple.
>>
>> And while driving, allow yourself the luxury of imaging that other
>> drivers are wondering whether or not you're carrying a Mellotron in the
>> back.
>> best,
>> john barrick
>>
>> PS - I also found it convenient to remove the tape frame, wrap it up in
>> a sheet or blanket and lay it down flat also.
>>
>> DaSwans wrote:
>> >
>> >
>> >
>> > >
>> > Okay. Dumb noob question: Which part exactly is the head block?
>> >
>> > Thanks for the dimensions and the tip about taking off the feet. I'll
>> > probably lay it down on it's back. Anything else I need to know about
>> > transporting it? It does have it's original protect-o-muff (tron
>> > bondage). That should protect the lovely brushed on latex paint job it
>> > received at some point.
>> >
>> > How important is the tape box cover (the aluminum thing that the tapes
>> > roll into when they're played)? I see it missing in a lot of pictures
>> > and the tron I'm buying is missing it. It seems like one could be made
>> > relatively easily (unless, of course, somebody out there has a spare).
>> > I'm sure the cover will be the least of my problems, however. I'm just
>> > thinking out loud and taking mental inventory of the project ahead.
>> >
>> >
>>
>
>

>
>
> Awesome, John. I printed out your comments and will use them as a
> checklist. Thanks!
>
> -Dan
> On Jun 25, 2009, at 11:45 PM, john barrick wrote:
>
>>
>>

From: DaSwans <tspit74@comcast.net>
Subject: [newmellotrongroup] Will an M400 fit in a 2001 Subaru Forester?
To: newmellotrongroup@yahoogroups.com
Date: Thursday, June 25, 2009, 8:34 PM

with the seats down? I should know this before I drive 500 miles to pick it up. Thanks!

-Dan
#854 (on Saturday)