The Mellotron Group group photo

Yahoo Groups archive

The Mellotron Group

Index last updated: 2026-03-31 23:34 UTC

Thread

SMS3 Schematic

SMS3 Schematic

2012-05-29 by danhera

Hello All,
Would anyone be able to help me locate a schematic for a SMS3 card?

Regards,
Jarrod

Re: [newmellotrongroup] SMS3 Schematic

2012-05-29 by Jim Blair

Jarrod,

I have a ton of documentation, I'm pretty sure that the SMS3 schematic is in there somewhere. Let me know if you can't find a scan online, and I'll dig it up and scan it for you.

Jim



At 10:08 PM 5/28/2012, you wrote:
Show quoted textHide quoted text


Hello All,
Would anyone be able to help me locate a schematic for a SMS3 card?

Regards,
Jarrod



No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1411 / Virus Database: 2092/4766 - Release Date: 01/25/12
Internal Virus Database is out of date.

Re: [newmellotrongroup] SMS3 Schematic

2012-05-29 by lsf5275@aol.com

I have one around here someplace. I'll try and post it tomorrow night. What's the problem?
In a message dated 5/29/2012 1:08:59 A.M. Eastern Daylight Time, no_reply@yahoogroups.com writes:
Show quoted textHide quoted text

Hello All,
Would anyone be able to help me locate a schematic for a SMS3 card?

Regards,
Jarrod

Re: [newmellotrongroup] SMS3 Schematic

2012-05-29 by jarrod dandrea

Nothing major. Just got it and want to bring it up to top spec and have more clarity on the modifications that were done to the power supply in order to fit the new card.

Thanks for posting the schematic.
-Jarrod


Re: [newmellotrongroup] SMS3 Schematic

2012-05-29 by lsf5275@aol.com

The only thing that would likely have been done to the power supply was to slightly change the wiring. Sound sales offered an upgrade from the CMC-10 that included instructions. It's about a 5-10 minute job. Although the architecture of the SMS3 is similar to the SMS2, the edge connectors are slightly changed in the SMS3. Schematics are unlikely to deliver the information you are looking for. I, or others probably can give you the Sound Sales information. Converting from a CMC-10 to any SMS board eliminates the need for a number of components in the power supply. Most people that made the conversions just left them there, even though they were no longer connected to anything.
Frank
In a message dated 5/29/2012 12:11:26 P.M. Eastern Daylight Time, danhera@yahoo.com writes:
Show quoted textHide quoted text

Nothing major. Just got it and want to bring it up to top spec and have more clarity on the modifications that were done to the power supply in order to fit the new card.

Thanks for posting the schematic.
-Jarrod


Re: [newmellotrongroup] SMS3 Schematic

2012-05-30 by lsf5275@aol.com

Sure, I'll scan and email them on Wednesday,
In a message dated 5/29/2012 8:47:49 P.M. Eastern Daylight Time, danhera@yahoo.com writes:
Show quoted textHide quoted text

Thanks for the info Frank. If you could send me the Sound Sales info I would appreciate it.

-Jarrod